Lector de Feeds

Criando a página Mídias de instalação-pt-BR

New page

[[Category:Documentation]]
[[Category:Howtos]]
[[Category:Installing]]

{{multi language banner-pt-BR|[[Installationsmedien-de|Deutsch]] ; [[Installation_Media|English]] ; [[Metodos_de_instalación|Español]] ; [[Supports_d'installation-fr|Français]] ; [[Mageia installatie-methoden-nl|Nederlands]] ; [[Metodi d'installazione-it|Italian]] ; [[Disco_de_Instalação|Portuguese (Portugal)]] ; [[Kurulum_Ortamı|Türkçe]] ; [[Mídias de instalação-pt-BR|português brasileiro]] ;}}

{{Draft-pt-BR}}

{{introduction-pt-BR|Esta página descreve os vários arquivos disponíveis de instalação e ISO Live para a distribuição Mageia e como baixá-los e colocá-los em mídia para uso. <br> Também descrevemos a verificação e reparação do download, como restaurar o pen drive e abreviatura do uso e as possibilidades dos diferentes ISO.}}

== Escolhas ==

''Os vários arquivos ISO do Mageia.''
* '''Live:''' ''Você pode executá-los diretamente'' do DVD ou pendrive sem instalar. Pode instalar-se no disco, mas não atualizar a versão anterior da Mageia. Use-os para verificar a Mageia e a compatibilidade da máquina - ou use como um sistema portátil. Eles contêm os aplicativos mais populares e vêm em quatro variantes com diferentes ambientes de desktop para experimentar: três sistemas '''64-bit''' com '''Plasma, GNOME''' e '''Xfce''' respectivamente, além '''32-bit Xfce'''. No USB ''você pode habilitar o armazenamento persistente'' que será usado automaticamente para configurações, arquivos do usuário, atualizações e aplicativos adicionados.
* '''Instalador clássico:''' ''Pode ser usado offline para instalar ou atualizar Mageia'', opcionalmente com conexão à Internet para atualizações (recomendado durante a atualização) e para recuperar mais pacotes. Vem em duas variantes: '''32- e 64-bit'''. Ele contém muitos aplicativos e desktops para escolher, e muito mais estão disponíveis online.
* '''Netinstall:''' ''Disco de inicialização do instalador mínimo'', deve ser conectado à rede e baixar o que instalar. Quatro variantes: '''32 ou 64 bits, com drivers proprietários ou não.'''

Para mais detalhes, veja abaixo, em [[#Iso_do_instalador clássico|ISO do instalador clássico]], [[#ISO do instalador via rede|ISO do instalador via rede]], [[#ISO_Live|ISO Live]].
Veja também nossa documentação: [https://doc.mageia.org/installer/8/en/content/Select-and-use-ISOs.html Selecione e uso as ISOs].

Tamanhos: Todos os Live e clássicos cabem em um DVD. A maioria também cabe em um pen drive de 4 GB, a exceção é o Mageia 9 64-bit clássico.

Todas as imagens ISO do Mageia são híbridas, o que significa que você pode gravá-las em um DVD (CD funciona para netinstall), bem como pen drive e elas podem inicializar.

== Download ==

Use nossa [http://www.mageia.org/downloads/ página de download] ou encontre as ISOs clássicas e Live em seu [https://mirrors.mageia.org/ favourite] espelho favorito ''<mirror url>/mageia/iso/, (por exeplo http://mirror.accum.se/mirror/mageia/iso/).'' O instalador via rede pode ser encontrado em ''<mirror url>/mageia/distrib/$RELEASE/$ARCH/install/images/ (i.e http://mirror.accum.se/mirror/mageia/distrib/9/x86_64/install/images/).'' Para todos, exceto instalador via rede, você pode escolher Bittorent se quiser.

=== Verificando a integridade do arquivo de imagem baixado ===

==== Princípio ====

Você notou na página Download Mageia, o número hexadecimal chamado '''md5sum''', '''sha512sum''' ou '''sha3-512sum''' ?
''(Nas pastas de espelho estão disponíveis como arquivos.)''
Eles foram calculados por um algoritmo do arquivo ISO. Se você pedir a esse algoritmo para calcular novamente esse número do seu arquivo baixado, ou você tem o mesmo número e seu arquivo baixado está correto, ou o número é diferente e seu ISO está quebrado, provavelmente um download incompleto. Não tente usar o ISO quebrado. Faça o download novamente ou use o método [[#How to fix a Broken ISO Download|BitTorrent (Como corrigir o download quebrado de uma ISO)]] abaixo.

Além disso, nossos arquivos de soma de verificação são assinados para evitar que imagens e somas de verificação sejam usurpadas.

==== Prático ====

Abra um terminal, como um usuário padrão, e digite o comando {{cmd-pt-BR|sha512sum /caminho/para/a/imagem/arquivo.iso}} :
Para este exemplo, usamos a imagem de iso Mageia 7.1, a pasta é {{folder-pt-BR|/Mageia-7.1-x86_64}} o arquivo ISO é {{file-pt-BR|Mageia-7.1-x86_64.iso}}. Você precisa do arquivo ISO e do checksum na mesma pasta.
{{output|sha512sum -c Mageia-7.1-x86_64.iso.sha512}}Mageia-7.1-x86_64.iso: OK{{stop}}

Você pode fazer o mesmo com {{cmd|sha3-512sum}} :
{{output|sha3-512sum -c Mageia-7.1-x86_64.iso.sha3}}Mageia-7.1-x86_64.iso: OK{{stop}}

=== Como corrigir um download quebrado de uma ISO ===

Se você passou um longo tempo baixando um ISO apenas para descobrir que ele falha no teste da soma de verificação, não entre em pânico. Você pode não precisar baixar o ISO novamente. É possível usar [http://en.wikipedia.org/wiki/Bittorrent BitTorrent] ou [http://en.wikipedia.org/wiki/Wget wget] para reconstruir o ISO e baixar ou corrigir as peças faltando. Veja [http://www.damnsmalllinux.org/wiki/index.php/Fixing_a_Corrupted_ISO este artigo] da wiki Damn Small Linux para uma cartilha muito útil sobre o assunto.

== Coloque a ISO em uma mídia de sua escolha ==

''Também é possível [[Installing_Mageia_from_ISO_on_disk|instalar o Mageia a partir da ISO no disco]].''

=== Gravar uma ISO para mídia óptica ===

As ISOs de instalação via rede se cabem facilmente em um CD. Todas as outras precisam de um DVD.

Veja [[Gravação_de_imagens_em_CD_e_DVD-pt-BR|Gravação de imagens em CD e DVD]].

=== Gravar a imagem ISO do Mageia em um pen drive ===

Todas as ISOs do Mageia são híbridas, o que significa que você pode "gravá-las" em um pendrive e usá-lo para inicializar, testar e (opcionalmente) instalar o sistema. Mas, observe a limitação de tamanho como, por exemplo, uma imagem ISO de 4 GB pode ser muito grande para alguns pen drives de 4 GB devido ao arredondamento do tamanho para GB.

''Observe que você não pode copiar o arquivo usando um gerenciador de arquivos, você precisa de uma ferramenta para gravar o conteúdo do arquivo diretamente na raiz do dispositivo (e não uma partição).''

{{warning-pt-BR|"Gravar" uma imagem em um dispositivo [[#Gravar a ISO do Mageia em um pen drive<!--Not necessarily the same word.-->|<span style="color:red">'''destrói'''</span>]] o acesso a quaisquer arquivos anteriores!}}
{{Note-pt-BR|Para restaurar o pen drive para a capacidade vazia total, muitas ferramentas populares falham - mas existem bons métodos, consulte [[#Removendo_os_arquivos_ISO_do_pen_drive|Removendo os arquivos ISO do pen drive]] abaixo.}}
{{warning-pt-BR|[[#Gravar a ISO do Mageia em um pen drive|<span style="color:red">'''O Unetbootin não deve ser usado'''</span>]] para copiar a imagem ISO para um pen drive (veja abaixo).}}

'''Para gravar uma instalação do Mageia ou ISO Live em um pen drive, você pode escolher uma das várias ferramentas:'''

* De um sisema '''Mageia''' use [[Gravando_imagens_ISO_em_pen_drives|'''IsoDumper''']]. Ele também suporta a criação de [[#Persistência_com_dispositivos_de_memória|persistência]] - para que o pen drive se lembre do seu trabalho, configurações, atualizações do sistema, aplicativos adicionados...
* Do '''Ubuntu''' use o aplicativo {{prog-pt-BR|Discos}} com a ação "Restaurar uma imagem" e selecione o arquivo .iso.
* Do '''Mint''' use {{prog-pt-BR|Minstick}}, que é semelhante ao IsoDumper.
* De '''qualquer sistema Linux''' simplesmente copie a ISO para o pen drive com {{cmd-pt-BR|dd}} (veja um exemplo abaixo).
* Use [https://www.ventoy.net '''Ventoy'''] para ter uma ou várias ISOs em um dispositivo, com menu para escolher.
** O Ventoy pode ser instalado no dispositivo de memória usando Linux, MS Windows ou qualquer sistema que possa gravar [https://www.ventoy.net/en/download.html seu arquivo ISO] para o dispositivo.
** '' '''Nota:''' ao executar qualquer instalador Mageia no Ventoy, você deve escolher o particionamento personalizado e selecionar manualmente a unidade de destino correta para partições e, no final, selecione o local correto para o carregador de inicialização.''
* Do '''Microsoft Windows''', veja [[Gravar a ISO do Mageia em um pen drive - Ferramentas alternativas]].

==== <span id="Gravar_a_ISO_do_Mageia_em_um_pen_drive"><!-- Please do not delete--></span>Examplo: Usando o comando ''dd'' para instalar arquivos ISO Live em um pen drive ====

Open a console and go to the directory, where the {{file|name_of_the_mageia.iso}} is stored (in this example the file {{file|Mageia-7-Live-Plasma-x86_64.iso}} is stored in the directory {{folder|Downloads}})
{{command|cd Downloads}}
{{warning|'''BE VERY CAREFUL TO USE THE CORRECT DEVICE NAME AS YOU CAN OVERWRITE YOUR HARD DISK WITHOUT ANY WARNING'''}}
'''HINT''': type {{cmd|lsblk}} or {{cmd|mount}} in a terminal window to see the USB device name.
'''NEVER USE /dev/sda''' (that's usually your main system drive).
Since this method uses the whole USB stick you have to specify the node of the device and not of a partition on the device '''(e.g. use /dev/sde not /dev/sde1)'''; you should be very careful when using this method because writing the image to a SCSI or SATA hard disk will render it unbootable and destroy some data on it.

Become after that a root with the command
{{command|su -p}}
and enter the root password. After that you can dump the ISO to an USB device via the following command
{{command|<nowiki>dd if=Mageia-7-Live-Plasma-x86_64.iso of=/dev/sd(x) bs=1M status=progress && sync</nowiki>|prompt=#}}
where '''(x)=your device name eg: /dev/sdb;/dev/sdc....etc'''
{{pre|<nowiki>2887+1 records in
2887+1 records out
3027845120 bytes (3,0 GB, 2,8 GiB) copied, 145,719 s, 20,8 MB/s</nowiki>}}
* Then safely remove the USB (it should be mounted)
* Type {{cmd|mount}} again and see which device is missing

== Installation-only media ==

Mageia's Classic and Netinstall ISO both use the traditional drakx installer. These are '''not''' Live DVD/CDs, i.e. they cannot be used to preview or test run the distro, they can only be used to install Mageia on an HDD (or USB HDD). Below is a detailed explanation of the features that each of these media provides.

=== Classic installer ISO ===

The Classic installation ISO image can be used without internet connection, and includes lots of software including the most prominent desktops to choose from: Plasma5, GNOME, Cinnamon, MATE, LXDE, Xfce.

Optionally you may add the online Mageia repositories during the installation, which means you can install updates while installing, and more packages than those available on the disc.

You'll be given the choice to add nonfree software (you don't pay for it: the ''non-free'' means it's not covered by the [https://en.wikipedia.org/wiki/Free_Software_Foundation Free Software Foundation] licensing) during install, for finding nonfree software on it (e.g. the NVIDIA or AMD/ATI proprietary graphics cards drivers or firmware for wifi cards... etc). You can also add the online repositories during the installation and you can reconfigure your hardware at the Summary stage (towards the end of the installation) to install the nonfree software needed for your hardware.

The Classic Installer ISO comes in two editions:
* i586 (32-bit)
* x86_64 (64-bit)
{{Note|the 64-bit version will not work on 32-bit hardware.<br> UEFI is supported by both the 32-bit and the 64-bit ISOs}}

=== Network Installer ISO ===

You can perform installs by downloading over network by booting on either ''netinstall.iso'' or ''netinstall-nonfree.iso''.

Both ''netinstall.iso'' and ''netinstall-nonfree.iso'' are very minimalistic images, which boot stage 1 of the drakx installer to set up the sources to download stage 2 and packages from.

The ''-nonfree'' version contain non free drivers needed for some hardware. Both comes in both 32- and 64-bit versions. For more information see [[Mageia_Netinstall_Iso_(Boot.iso)]].

'''Note:''' only nonfree works with wifi.

== Live ISO ==

=== Live mode ===

A Live ISO can be used to preview Mageia without first installing it on your computer. Simply download the ISO, burn it on a disk using your favourite ISO burner (or dump it on a USB key using ''dd or IsoDumper'' , see [[#Dump Mageia ISO on a USB flash drive|Dump Mageia ISO on a USB flash drive]]), boot the system to see how well Mageia works on your computer.
* To limit the size of ISOs, each Mageia Live ISO contains only one desktop environment (Plasma5, GNOME or Xfce). CDs size ISOs are no more available since Mageia 5.
* Starting from Mageia 7, booting on a UEFI system is supported by both the 32-bit and 64-bit media (previous releases supported UEFI only for 64-bit media)

==== Installing a running Live to disk ====

When you find Mageia Live runs fine you may install it as it is to your HDD; there's an icon on the desktop to start the ''draklive'' installer. The install will be with all settings and updates the Live currently use included.

{{Note| Installing a Live ISO to your computer simply copies the virtual file system of the Live ISO to your drive, along with some machine-specific configuration. For this reason, Live ISOs can only be used to create completely fresh installations, '''they cannot be used to upgrade from previous releases'''.}}
{{Warning| Create a user with a new login if you don't format a /home partition. User's configuration is written in user's space, which can overwrite some personal data. This can be the case for Firefox, Thunderbird, Kmail data... }}

=== Persistence with memory devices ===

If you use a memory device like USB stick, Live Mageia 7 and later can be run from it in persistent mode.

''Also see [[Persistent_live_systems|Persistent Live systems]].''

==== Advantages of persistence ====

* Store your work, logins, settings - from Mageia 8 and later ''encrypted'' if you like, see below
* As it no longer uses the RAM file system, it stands more chance of working on machines with low amounts of RAM. (Like an internal disk installed system.)
* If you really need to use one of the proprietary drivers, it doesn't have to be rebuilt each time you reboot. This is particularly important if you need the Broadcom wl driver, because that often only works after a reboot.
* Faster easier boot - no questions of locale, time...
* Network etc configured, you can surf the net, reach your cloud... quickly
* Have your printer and other devices installed
* Add additional program of choice
* Functionality updates to programs
* Security updates i.e to your web browser

==== About speed ====

The disadvantage is that writing to a filesystem on the USB stick can be slow. It's worth investing in a high-speed USB stick if you want to use persistence, and using USB 3.0 if you can, and check the write speed specification when buying USB stick. Here is about [[Testing_storage_speed|Testing storage speed]]. And naturally, the lightweight Xfce desktop will be more agile than Gnome or Plasma.

To minimise the number of packages downloaded and stored in the persistent partition: uninstall packages you do not need - good to do before the first update. See [[Removing packages#Persistent Live USB]] and more on that wiki page.

==== Realisation ====

Use our graphical tool {{cmd|isodumper}} when burning the stick. You can select persistence and encryption, see [[IsoDumper Writing ISO images on USB sticks]].

Later boot on it, answer the first time questions of language etc, configure network, remove packages per above, update the system.

''(Technical details follow)''

A partition in ext4 format has to be added in the remaining space alongside the system partition and be named "mgalive-persist".
{{Note|Mageia 7 {{prog|diskdrake}} and {{prog|gparted}} do not show nor handle partitions on Live ISOs. Mageia 8 {{prog|diskdrake}} have been improved and tested successfully for this task.}}

The partition may be encrypted - you enter a key at boot time - securing sensitive data like logins and your files.

The partition is searched on the same base device as the ISO image, and if found, used for the writeable layer of the live filesystem instead of creating a temporary RAM disk for the purpose. Thus stored information will be recovered at the next boot. This includes your choice of language, network settings, all your files, and any system update and alteration.

=== LiveUSB MultiBoot Methods (verified) ===

{{note|'''Easy2boot''' works only with Windows.}}
* Make an Easy2Boot USB Flash/Hard drive [http://www.easy2boot.com '''Easy2Boot'''] - copy the {{file|ISO file (and any others)}} to the {{folder|\_ISO\LINUX}} or {{folder|\_ISO\MAINMENU}} folder.
* The Linux tool [http://sourceforge.net/projects/multisystem/ '''MultiSystem'''] is supported in French and English.

=== Other LiveUSB Methods (not yet verified) ===

* The free Windows tool [http://www.linuxliveusb.com/ '''LiLi'''] supports many distros.
* Easy2Boot project [http://www.rmprepusb.com RMPrepUSB] is a grub4dos multiboot USB drive solution. It boots 99% of all linux distros (it uses a generic method). All you need to do is copy the ISO file to the grub4dos USB drive's \_ISO\MAINMENU folder (no utility needed) and then run some defrag utility to ensure the ISO file is contiguous. ([https://forums.mageia.org/en/viewtopic.php?f=7&t=4980&p=39941&hilit=rmprepusb#p39941 author's post in the forum])

=== Other LiveUSB Methods (currently not working) ===

* A sourceforge project [http://sourceforge.net/projects/multibootusb/ '''multibootusb'''], a tool for several Linux distros or Windows versions, uses the Grub4dOS bootloader (and Gambas3).
* The Windows tools YUMI and UUI at [http://www.pendrivelinux.com/ '''PenDriveLinux'''] (for single-boot and multi-boot) may work someday, likely with boot parameters specifying the location for distro files; both unpack an ISO to flash and use syslinux to make it bootable.

== Removing the ISO files from USB Media ==

'''Removing the files from a USB stick once you've installed Mageia, so they can be used for other purposes again.'''

''Most graphical formatting tools have problems with media where an ISO file has been put. But in Mageia we have tools that work great for that. Here we also give example for *nix command line and another OS.''

'''If you just want to put another ISO on the stick, there is no need for this procedure.''

=== Using Mageia ===

{{prog|IsoDumper}} ''''' - Most safe! '''''

'' This is the safest option as it tries hard to make you unable to select system drives. ''

Apart from dumping ISO files to the device, it can also take a backup image, and in this case, you select to format it to one of a few common filesystem types, and label (name) it.

{{Prog|Diskdrake}} '' (From Mageia 8 onwards) ''

Select the device - Make very sure it is the right one - all data on it WILL be lost!

Then press the {{menu|Clear}} button down left, then partition the device.

{{prog|Installer}} '' (From Mageia 8 onwards) ''

''(Yes you can perform a conventional install to a removable device.)''

Classic and Live installers from Mageia 8 onwards take care of it when you select use the whole disk, or when you press {{menu|Clear}} in custom partitioning.

=== Using command line ===
... in Mageia or similar *nix system.

1) Open a Terminal and type:
{{pre|su - }}
to switch to root. You will be prompted for the root password

2) Confirm the device by typing (or copying & pasting) this command.
{{pre|fdisk -l }}
This list all drives and some info on them. The entry for a 4GB flash drive may start like:
{{pre|Disk /dev/sdb: 3980 MB, 3980394496 bytes}}
...and some info on that drive. Note the /dev/sd<some letter>
{{warning| '''''Make sure you are reformatting the correct drive, there is no going back - all data on that drive *WILL* be lost!'''''
* Your device could have a different designation than ''/dev/sdb'', but we will stick with this designation in the following procedure.
* The size of the drive is a good way to confirm which drive you are going to reformat. Also it usually is the last one fdisk lists.}}
3) Unmount the device by typing (or copying & pasting):
umount /dev/sdb

4) Reformat the USB device to fat32, by typing (or copying & pasting):
{{pre|mkdosfs -F 32 -I /dev/sdb}}

Now you can remove it.

=== Using Microsoft Windows ===

A normal format will not restore access to full storage capacity although if you use the Disk Management tool (right-click on the Windows Logo > Disk Management, or type "Disk Management" into the search box either at the Start Button or in Control Panel), you should be able to restore full storage access. You will need to delete the partition on the Flash Drive and then create a new one and format it. If that's just a little bit daunting, then [http://rufus.akeo.ie/ '''rufus'''] or HPformatUSB can restore partitioning (this section to be completed). Xgrind

‎Installer le modèle acoustique depuis elograf

← Older revision Revision as of 14:22, 16 February 2025 Line 52: Line 52:     ==== Installer le modèle acoustique depuis elograf ==== ==== Installer le modèle acoustique depuis elograf ==== −Le modèle peut être installé depuis la configuration d'elograf et stocké au choix dans l'espace système ou dans l'espace utilisateur.+Le modèle peut être installé depuis la configuration d'elograf et stocké au choix dans l'espace système ou dans l'espace utilisateur. Elograf est disponible dans le [[Installez_et_supprimez_des_logiciels_pour_les_profanes-fr|Centre de Contrôle Mageia]].     == Utilisation == == Utilisation == Fred-th

To do a good job, we need good tools. Some of our servers are old, no longer powerful enough and have limited disk resources to meet the needs of developers. RPM manufacturing takes a long time and this is detrimental to the efficiency of maintaining and evolving the distribution. In short, the machines are well depreciated.

This is why our infrastructure is first getting a makeover. Better adapted to new technologies, it will allow our developers to work faster and more efficiently.

So where is this new infrastructure?

 We received 5 new servers:

– 2 new nodes for building packages: HPE ProLiant DL 360 Gen10 – 2xXeon 6126 (12C/2.6GHz) –

256GB RAM – 2xSSD 3.8TB HW Raid 1 – 2x10Gb/s NICs

– 2 servers to replace sucuk and duvel: HPE ProLiant DL 380 Gen10 – 2 Xeon 6126 (12C/2.6GHz) –

256GB RAM – 2xSSD 3.8TB HW Raid 1 – 10xHDD 12TB HW Raid 5 – 2x10Gb/s NICs

– 1 server for deployment and backup: HPE ProLiant DL80 Gen9 – 2xXeon  E5-2603v4

(6C/1.7GHz) – 256GB RAM – 6xHDD 6TB (donated, with some renewed parts)

– 1 Arista 7120T switch 20xRJ-45 10Gb/s 4xSFP+ 10Gb/s for interconnecting the machines

One of the ideas is to use the latest server to deploy quickly and as automatically as possible the construction nodes and other machines. The method is ready for x86_64 nodes and is being finalized for ARM nodes. The preparation of the servers takes time because the teams anticipate the future and future developments.

Once the preparation part of our servers is finished, the integration part into the Data Center will remain.

We are therefore taking our time to do things well in order to perpetuate the future and future versions of Mageia.

In the meantime, the future version 10 of Mageia continues to bubble in its cauldron! But we are not ready yet to plan a release date for the moment.

Feel free to come and strengthen our teams.

Para hacer un buen trabajo, necesitamos buenas herramientas. Algunos de nuestros servidores son viejos, ya no son lo bastante potentes y tienen recursos de disco limitados para satisfacer las necesidades de los desarrolladores. Se tarda mucho en producir los RPM, lo que va en detrimento de la eficacia del mantenimiento y la actualización de la distribución. En resumen, las máquinas están bien amortizadas.

Es por eso que nuestra infraestructura está recibiendo un lavado de cara. Más adaptada a las nuevas tecnologías, permitirá a nuestros desarrolladores trabajar de forma más rápida y eficaz. ¿Cuál es el estado de esta nueva infraestructura? Hemos recibido 5 nuevos servidores:

· 2 nuevos nodos de construcción de paquetes: HPE ProLiant DL 360 Gen10 – 2xXeon 6126 (12C/2.6GHz) – 256GB RAM – 2xSSD 3.8TB HW Raid 1 – 2x10Gb/s NICs.

· 2 servidores para reemplazar sucuk y duvel: HPE ProLiant DL 380 Gen10 – 2 Xeon 6126 (12C/2.6GHz) – 256GB RAM – 2xSSD 3.8TB HW Raid 1 – 10xHDD 12TB HW Raid 5 – 2x10Gb/s NICs.

· 1 servidor de despliegue y copia de seguridad: HPE ProLiant DL80 Gen9 – 2xXeon E5-2603v4 (6C/1.7GHz) – 256GB RAM – 6xHDD 6TB (una donación, con algunas partes renovadas)

· 1 switch Arista 7120T 20xRJ-45 10Gb/s 4xSFP+ 10Gb/s para interconectar las máquinas.

El plan es utilizar el último servidor para desplegar los nodos de construcción y el resto de máquinas de forma rápida y lo más automática posible. El método está listo para los nodos x86_64 y se está ultimando para los nodos ARM (servidores remotos). La preparación de los servidores lleva su tiempo, ya que nuestros equipos se anticipan al futuro y a los futuros desarrollos.

Una vez finalizada la preparación de nuestros servidores, el siguiente paso será integrarlos en el Centro de Datos. Por lo tanto, nos estamos tomando nuestro tiempo para hacer las cosas bien y poder asegurar el futuro y las futuras versiones de Mageia. Por el momento, no publicamos una fecha de lanzamiento provisional para Mageia 10.

Mientras tanto, ¡la futura versión 10 de Mageia sigue burbujeando en su caldero!

No dudes en unirte a nuestros equipos.

In Mageia/9/x86_64: Mesa is an OpenGL 4.6 compatible 3D graphics library.

In Mageia/9/aarch64: Mesa is an OpenGL 4.6 compatible 3D graphics library.

In Mageia/9/armv7hl: Mesa is an OpenGL 4.6 compatible 3D graphics library.

In Mageia/9/i586: Mesa is an OpenGL 4.6 compatible 3D graphics library.

In Mageia/cauldron/x86_64: Rachota is a portable application for timetracking different projects. It runs everywhere. It displays time data in diagram form, creates customized reports and invoices or analyses measured data and suggests hints to improve user's time usage. The totally portable yet personal timetracker.

In Mageia/cauldron/i586: Rachota is a portable application for timetracking different projects. It runs everywhere. It displays time data in diagram form, creates customized reports and invoices or analyses measured data and suggests hints to improve user's time usage. The totally portable yet personal timetracker.

In Mageia/cauldron/i586: A program to convert images from PPM format into the control language for the Alps Micro-Dry printers, at various times sold by Citizen, Alps and Okidata. This program drives the Alps Micro-Dry series of printers, including the Citizen Printiva series, Alps MD series, and Oki DP series (but not yet the DP-7000). In the current release, the program drives the standard mode fairly well; the dye sublimation mode very well; and the VPhoto mode reasonably well. It supports all the colours available up to the DP-5000, including the foil colours.

In Mageia/cauldron/x86_64: A program to convert images from PPM format into the control language for the Alps Micro-Dry printers, at various times sold by Citizen, Alps and Okidata. This program drives the Alps Micro-Dry series of printers, including the Citizen Printiva series, Alps MD series, and Oki DP series (but not yet the DP-7000). In the current release, the program drives the standard mode fairly well; the dye sublimation mode very well; and the VPhoto mode reasonably well. It supports all the colours available up to the DP-5000, including the foil colours.

In Mageia/cauldron/x86_64: This tool tries to recover JFIF (JPEG) pictures and MOV movies (using recovermov) from a peripheral. This may be useful if you mistakenly overwrite a partition or if a device such as a digital camera memory card is bogus.

In Mageia/cauldron/i586: This tool tries to recover JFIF (JPEG) pictures and MOV movies (using recovermov) from a peripheral. This may be useful if you mistakenly overwrite a partition or if a device such as a digital camera memory card is bogus.

In Mageia/cauldron/x86_64: Rdfind is a program that finds duplicate files. It is useful for compressing backup directories or just finding duplicate files. It compares files based on their content, NOT on their file names.

In Mageia/cauldron/i586: Rdfind is a program that finds duplicate files. It is useful for compressing backup directories or just finding duplicate files. It compares files based on their content, NOT on their file names.

In Mageia/cauldron/x86_64: Unifont is a Unicode font with a glyph for every visible Unicode Basic Multilingual Plane code point and more, with supporting utilities to modify the font. This package contains tools and glyph descriptions.

In Mageia/cauldron/i586: Unifont is a Unicode font with a glyph for every visible Unicode Basic Multilingual Plane code point and more, with supporting utilities to modify the font. This package contains tools and glyph descriptions.

In Mageia/cauldron/i586: RANCID monitors a router's (or more generally a device's) configuration, including software and hardware (cards, serial numbers, etc) and uses CVS (Concurrent Version System) or Subversion to maintain history of changes. RANCID does this by the very simple process summarized here: * login to each device in the router table (router.db), * run various commands to get the information that will be saved, * cook the output; re-format, remove oscillating or incrementing data, * email any differences (sample) from the previous collection to a mail list, * and finally commit those changes to the revision control system RANCID also includes looking glass software. It is based on Ed Kern's looking glass which was once used for http://nitrous.digex.net/, for the old-school folks who remember it. Our version has added functions, supports Cisco, Juniper, and Foundry and uses the login scripts that come with rancid; so it can use telnet or ssh to connect to your devices(s). Rancid currently supports Cisco routers, Juniper routers, Catalyst switches, Foundry switches, Redback NASs, ADC EZT3 muxes, MRTd (and thus likely IRRd), Alteon switches, and HP Procurve switches and a host of others. Rancid is known to be used at: AOL, Global Crossing, MFN, NTT America, Certainty Solutions Inc.

In Mageia/cauldron/x86_64: RANCID monitors a router's (or more generally a device's) configuration, including software and hardware (cards, serial numbers, etc) and uses CVS (Concurrent Version System) or Subversion to maintain history of changes. RANCID does this by the very simple process summarized here: * login to each device in the router table (router.db), * run various commands to get the information that will be saved, * cook the output; re-format, remove oscillating or incrementing data, * email any differences (sample) from the previous collection to a mail list, * and finally commit those changes to the revision control system RANCID also includes looking glass software. It is based on Ed Kern's looking glass which was once used for http://nitrous.digex.net/, for the old-school folks who remember it. Our version has added functions, supports Cisco, Juniper, and Foundry and uses the login scripts that come with rancid; so it can use telnet or ssh to connect to your devices(s). Rancid currently supports Cisco routers, Juniper routers, Catalyst switches, Foundry switches, Redback NASs, ADC EZT3 muxes, MRTd (and thus likely IRRd), Alteon switches, and HP Procurve switches and a host of others. Rancid is known to be used at: AOL, Global Crossing, MFN, NTT America, Certainty Solutions Inc.