No puedo entra mi home

[xguest@localhost ~]$ dmesg
Linux version 2.6.33.7-desktop-2mnb (qateam@titan.mandriva.com) (gcc version 4.4.3 (GCC) ) #1 SMP Mon Sep 20 19:00:25 UTC 2010
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
 BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007ba60000 (usable)
 BIOS-e820: 000000007ba60000 - 000000007babf000 (reserved)
 BIOS-e820: 000000007babf000 - 000000007bb80000 (usable)
 BIOS-e820: 000000007bb80000 - 000000007bbbf000 (ACPI NVS)
 BIOS-e820: 000000007bbbf000 - 000000007bbe2000 (usable)
 BIOS-e820: 000000007bbe2000 - 000000007bbf7000 (ACPI data)
 BIOS-e820: 000000007bbf7000 - 000000007bc00000 (usable)
 BIOS-e820: 000000007bc00000 - 0000000080000000 (reserved)
 BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
 BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
 BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.6 present.
last_pfn = 0x7bc00 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask FC0000000 write-back
  1 base 0FFE00000 mask FFFE00000 write-protect
  2 base 040000000 mask FC0000000 write-back
  3 base 07C000000 mask FFC000000 uncachable
  4 base 07BC00000 mask FFFC00000 uncachable
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 00c00000
init_memory_mapping: 0000000000000000-00000000373fe000
 0000000000 - 0000400000 page 4k
 0000400000 - 0037000000 page 2M
 0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 7000-d000
RAMDISK: 37aae000 - 37fef272
Allocated new RAMDISK: 00802000 - 00d43272
Move RAMDISK from 0000000037aae000 - 0000000037fef271 to 00802000 - 00d43271
ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
ACPI: XSDT 7bbf6120 0006C (v01 ACRSYS ACRPRDCT 00000001      01000013)
ACPI: FACP 7bbf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: DSDT 7bbe8000 073EA (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: FACS 7bb8d000 00040
ACPI: DMAR 7bbf5000 00068 (v01               ? 00000001      00000000)
ACPI: HPET 7bbf3000 00038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: APIC 7bbf2000 0006C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: MCFG 7bbf1000 0003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: ASF! 7bbf0000 000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SLIC 7bbe7000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: BOOT 7bbe6000 00028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
ACPI: SSDT 7bbe2000 00655 (v01  PmRef    CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
1096MB HIGHMEM available.
883MB LOWMEM available.
  mapped low ram: 0 - 373fe000
  low ram: 0 - 373fe000
  node 0 low ram: 00000000 - 373fe000
  node 0 bootmap 0000a000 - 00010e80
(10 early reservations) ==> bootmem [0000000000 - 00373fe000]
  #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
  #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
  #2 [0000100000 - 00007fd0e4]    TEXT DATA BSS ==> [0000100000 - 00007fd0e4]
  #3 [000009e000 - 0000100000]    BIOS reserved ==> [000009e000 - 0000100000]
  #4 [00007fe000 - 0000801254]              BRK ==> [00007fe000 - 0000801254]
  #5 [0000002000 - 0000003000]       TRAMPOLINE ==> [0000002000 - 0000003000]
  #6 [0000003000 - 0000007000]      ACPI WAKEUP ==> [0000003000 - 0000007000]
  #7 [0000007000 - 000000a000]          PGTABLE ==> [0000007000 - 000000a000]
  #8 [0000802000 - 0000d43272]      NEW RAMDISK ==> [0000802000 - 0000d43272]
  #9 [000000a000 - 0000011000]          BOOTMAP ==> [000000a000 - 0000011000]
Zone PFN ranges:
  DMA      0x00000000 -> 0x00001000
  Normal   0x00001000 -> 0x000373fe
  HighMem  0x000373fe -> 0x0007bc00
Movable zone start PFN for each node
early_node_map[5] active PFN ranges
    0: 0x00000000 -> 0x0000009e
    0: 0x00000100 -> 0x0007ba60
    0: 0x0007babf -> 0x0007bb80
    0: 0x0007bbbf -> 0x0007bbe2
    0: 0x0007bbf7 -> 0x0007bc00
On node 0 totalpages: 506603
free_area_init_node: node 0, pgdat c063b680, node_mem_map c1001000
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3966 pages, LIFO batch:0
  Normal zone: 1736 pages used for memmap
  Normal zone: 220470 pages, LIFO batch:31
  HighMem zone: 2193 pages used for memmap
  HighMem zone: 278206 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c2000000 s35416 r0 d21928 u1048576
pcpu-alloc: s35416 r0 d21928 u1048576 alloc=1*4194304
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 502642
Kernel command line: BOOT_IMAGE=linux root=UUID=ce3eaff1-39a1-45b1-981b-af175788e7bc resume=UUID=acf2716d-4cb1-4527-8de8-cdc49778bc2a splash=silent vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
------------[ cut here ]------------
WARNING: at drivers/pci/dmar.c:647 check_zero_address+0x8f/0x1cd()
Hardware name: Aspire 1410
Your BIOS is broken; DMAR reported at address zero!
BIOS vendor: INSYDE; Ver: v1.3310; Product Version: v1.3310
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.33.7-desktop-2mnb #1
Call Trace:
 [<c0144202>] warn_slowpath_common+0x72/0xa0
 [<c067d81f>] ? check_zero_address+0x8f/0x1cd
 [<c067d81f>] ? check_zero_address+0x8f/0x1cd
 [<c014427b>] warn_slowpath_fmt+0x2b/0x30
 [<c067d81f>] check_zero_address+0x8f/0x1cd
 [<c02f9b40>] ? acpi_get_table_with_size+0x58/0xa6
 [<c067d96e>] detect_intel_iommu+0x11/0x69
 [<c066237c>] pci_iommu_alloc+0x8/0xa
 [<c066ef82>] mem_init+0xe/0x296
 [<c0421a13>] ? x86_init_noop+0x8/0xa
 [<c065ec3d>] ? trap_init+0x2aa/0x2b1
 [<c042ef00>] ? notifier_call_chain+0x20/0x70
 [<c0428e00>] ? blk_cpu_notify+0x38/0x65
 [<c0428e00>] ? blk_cpu_notify+0x38/0x65
 [<c042ee00>] ? do_page_fault+0x2d0/0x3b0
 [<c042ee00>] ? do_page_fault+0x2d0/0x3b0
 [<c0428e00>] ? blk_cpu_notify+0x38/0x65
 [<c065b728>] start_kernel+0x1bb/0x351
 [<c065b397>] ? unknown_bootoption+0x0/0x1a0
 [<c065b09e>] i386_start_kernel+0x9e/0xa5
---[ end trace a7919e7f17c0a725 ]---
Initializing HighMem for node 0 (000373fe:0007bc00)
Memory: 1995776k/2027520k available (3270k kernel code, 29504k reserved, 2211k data, 520k init, 1121596k highmem)
virtual kernel memory layout:
    fixmap  : 0xffaf5000 - 0xfffff000   (5160 kB)
    pkmap   : 0xff400000 - 0xff800000   (4096 kB)
    vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
      .init : 0xc065b000 - 0xc06dd000   ( 520 kB)
      .data : 0xc0431ab3 - 0xc065a6c8   (2211 kB)
      .text : 0xc0100000 - 0xc0431ab3   (3270 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:2304
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1296.557 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 2593.11 BogoMIPS (lpj=1296557)
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
Checking 'hlt' instruction... OK.
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 15180 entries in 30 pages
DMAR: Host address width 36
DMAR: DRHD base: 0x00000000000000 flags: 0x1
DMAR: parse DMAR table failure.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Genuine Intel(R) CPU           U4100  @ 1.30GHz stepping 0a
Booting Node   0, Processors  #1
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (5186.48 BogoMIPS).
devtmpfs: initialized
Time: 15:48:19  Date: 02/28/11
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
DMAR: Forcing write-buffer flush capability
pci 0000:00:02.0: reg 10: [mem 0x90000000-0x903fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0x30d0-0x30d7]
pci 0000:00:02.1: reg 10: [mem 0x92400000-0x924fffff 64bit]
pci 0000:00:1a.0: reg 20: [io  0x30a0-0x30bf]
pci 0000:00:1a.7: reg 10: [mem 0x94504c00-0x94504fff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0x94500000-0x94503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0x3080-0x309f]
pci 0000:00:1d.1: reg 20: [io  0x3060-0x307f]
pci 0000:00:1d.2: reg 20: [io  0x3040-0x305f]
pci 0000:00:1d.7: reg 10: [mem 0x94504800-0x94504bff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0x30c8-0x30cf]
pci 0000:00:1f.2: reg 14: [io  0x30dc-0x30df]
pci 0000:00:1f.2: reg 18: [io  0x30c0-0x30c7]
pci 0000:00:1f.2: reg 1c: [io  0x30d8-0x30db]
pci 0000:00:1f.2: reg 20: [io  0x3020-0x303f]
pci 0000:00:1f.2: reg 24: [mem 0x94504000-0x945047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0x94505000-0x945050ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x3000-0x301f]
pci 0000:01:00.0: reg 10: [mem 0x93500000-0x9353ffff 64bit]
pci 0000:01:00.0: reg 18: [io  0x2000-0x207f]
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0x93500000-0x944fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
pci 0000:02:00.0: reg 10: [mem 0x92500000-0x92501fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.3:   bridge window [mem 0x92500000-0x934fffff]
pci 0000:00:1c.3:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:01: disabling [io  0x164e-0x164f] because it overlaps 0000:00:1c.3 BAR 13 [io  0x1000-0x1fff]
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
system 00:01: [io  0x0600-0x060f] has been reserved
system 00:01: [io  0x0610] has been reserved
system 00:01: [io  0x0800-0x080f] has been reserved
system 00:01: [io  0x0810-0x0817] has been reserved
system 00:01: [io  0x0820-0x0823] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0500-0x053f] has been reserved
system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
pci 0000:00:1c.0: PCI bridge to [bus 01-01]
pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:1c.0:   bridge window [mem 0x93500000-0x944fffff]
pci 0000:00:1c.0:   bridge window [mem 0x90400000-0x913fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 02-02]
pci 0000:00:1c.3:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.3:   bridge window [mem 0x92500000-0x934fffff]
pci 0000:00:1c.3:   bridge window [mem 0x91400000-0x923fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0:   bridge window [io  disabled]
pci 0000:00:1e.0:   bridge window [mem disabled]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0x93500000-0x944fffff]
pci_bus 0000:01: resource 2 [mem 0x90400000-0x913fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:02: resource 1 [mem 0x92500000-0x934fffff]
pci_bus 0000:02: resource 2 [mem 0x91400000-0x923fffff 64bit pref]
pci_bus 0000:03: resource 3 [io  0x0000-0xffff]
pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5380k freed
Simple Boot Flag value 0x5 read from CMOS RAM was invalid
Simple Boot Flag at 0x44 set to 0x1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1298908098.518:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1720
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 25 for MSI/MSI-X
vesafb: framebuffer at 0x80000000, mapped to 0xf7c80000, using 1875k, total 65472k
vesafb: mode is 800x600x16, linelength=1600, pages=67
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected 65532K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
PM: Checking image partition UUID=acf2716d-4cb1-4527-8de8-cdc49778bc2a
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
isapnp: No Plug & Play device found
Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input1
PM: Resume from disk failed.
registered taskstats version 1
  Magic number: 15:457:842
rtc_cmos 00:03: setting system clock to 2011-02-28 15:48:20 UTC (1298908100)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 520k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94504c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.7-desktop-2mnb ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94504800
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.7-desktop-2mnb ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x000030a0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33.7-desktop-2mnb uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00003080
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33.7-desktop-2mnb uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003060
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.33.7-desktop-2mnb uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.1
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 16, io base 0x00003040
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.33.7-desktop-2mnb uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.2
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led pmp pio slum part ccc ems
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504100 irq 26
ata2: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504180 irq 26
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504300 irq 26
ata6: SATA max UDMA/133 abar m2048@0x94504000 port 0x94504380 irq 26
usb 2-5: new high speed USB device using ehci_hcd and address 3
usb 2-5: New USB device found, idVendor=064e, idProduct=a102
usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
usb 2-5: Product: WebCam
usb 2-5: Manufacturer: SuYin
usb 2-5: SerialNumber: CN0316-S30C-OV061-VA-R02.02.02
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: ST9250315AS, 0001SDM1, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      ST9250315AS      0001 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 4-1: new low speed USB device using uhci_hcd and address 2
usb 4-1: New USB device found, idVendor=0458, idProduct=003a
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Optical Mouse
usb 4-1: Manufacturer: Genius
input: Genius Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input2
generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius Optical Mouse] on usb-0000:00:1d.0-1/input0
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
PM: Marking nosave pages: 000000000009e000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT4-fs (sda5): mounted filesystem with ordered data mode
Tomoyo security MAC extension available but disabled by default. If you want to
enable and use it, ccs-tools package must be installed.
udev: starting version 153
ACPI: Battery Slot [BAT1] (battery absent)
ACPI: AC Adapter [ACAD] (on-line)
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
ACPI: Lid Switch [LID0]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
ACPI: WMI: Mapper loaded
ACPI: SSDT 7ba6fc98 001E1 (v01  PmRef  Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 7ba6d598 00537 (v01  PmRef  Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
ACPI: SSDT 7ba6ee18 001CF (v01  PmRef    ApIst 00003000 INTL 20051117)
ACPI: SSDT 7ba6ff18 0008D (v01  PmRef    ApCst 00003000 INTL 20051117)
Non-volatile memory driver v1.3
Switching to clocksource hpet
fuse init (API version 7.13)
Adding 2128572k swap on /dev/sda6.  Priority:-1 extents:1 across:2128572k
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
i915 0000:00:02.0: irq 27 for MSI/MSI-X
[drm] set up 63M of stolen space
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Console: switching to colour frame buffer device 170x48
fb0: inteldrmfb frame buffer device
registered panic notifier
acpi device:02: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
atl1c 0000:01:00.0: setting latency timer to 64
cfg80211: Calling CRDA to update world regulatory domain
sd 0:0:0:0: Attached scsi generic sg0 type 0
cfg80211: World regulatory domain updated:
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
atl1c 0000:01:00.0: version 1.0.0.2-NAPI
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device WebCam (064e:a102)
input: WebCam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.33.7-desktop-2mnb-kds
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
iwlagn 0000:02:00.0: setting latency timer to 64
iwlagn 0000:02:00.0: Detected Intel Wireless WiFi Link 1000 Series BGN REV=0x6C
iwlagn 0000:02:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
iwlagn 0000:02:00.0: irq 28 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-agn-rs'
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 29 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
hda_codec: ALC269: BIOS auto-probing.
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0)
   speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
   hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
   mono: mono_out=0x0
   dig-out=0x1e/0x0
   inputs: mic=0x12, fmic=0x18, line=0x0, fline=0x0, cd=0x0, aux=0x0
realtek: No valid SSID, checking pincfg 0x4015812d for NID 0x1d
realtek: Enabling init ASM_ID=0x812d CODEC_ID=10ec0269
vboxdrv: Found 2 processor cores.
vboxdrv: fAsync=0 offMin=0x1e1 offMax=0xf5c
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.0 (interface 0x00160000).
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
atl1c 0000:01:00.0: irq 30 for MSI/MSI-X
ADDRCONF(NETDEV_UP): eth0: link is not ready
iwlagn 0000:02:00.0: firmware: requesting iwlwifi-1000-3.ucode
iwlagn 0000:02:00.0: loaded firmware version 128.50.3.1
ADDRCONF(NETDEV_UP): wlan0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
NET: Registered protocol family 17
wlan0: direct probe to AP 00:18:f3:83:d4:ab (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:18:f3:83:d4:ab (try 1)
wlan0: authenticated
wlan0: associate with AP 00:18:f3:83:d4:ab (try 1)
wlan0: RX AssocResp from 00:18:f3:83:d4:ab (capab=0x411 status=0 aid=2)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
martian source 255.255.255.255 from 10.211.0.1, on dev wlan0
ll header: ff:ff:ff:ff:ff:ff:00:01:5c:23:6b:81:08:00
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ip_set version 4 loaded
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
xt_time: kernel timezone is -0300
wlan0: no IPv6 routers present
u32 classifier
    Actions configured
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=190.147.47.217 DST=190.164.72.244 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=59937 DF PROTO=TCP SPT=3372 DPT=25451 WINDOW=65535 RES=0x00 SYN URGP=0
CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=124.237.121.93 DST=190.164.72.244 LEN=40 TOS=0x00 PREC=0x00 TTL=102 ID=256 PROTO=TCP SPT=6000 DPT=9415 WINDOW=16384 RES=0x00 SYN URGP=0
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=190.164.72.105 DST=190.164.72.244 LEN=36 TOS=0x00 PREC=0x00 TTL=254 ID=20944 PROTO=ICMP TYPE=8 CODE=0 ID=1 SEQ=244
usb 4-2: new full speed USB device using uhci_hcd and address 3
usb 4-2: New USB device found, idVendor=043d, idProduct=007a
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: USB Hub
usb 4-2: Manufacturer: Lexmark
hub 4-2:1.0: USB hub found
hub 4-2:1.0: 2 ports detected
usb 4-2.1: new full speed USB device using uhci_hcd and address 4
usb 4-2.1: New USB device found, idVendor=043d, idProduct=007d
usb 4-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=7
usb 4-2.1: Product: X1200 Series
usb 4-2.1: Manufacturer: Lexmark
usb 4-2.1: SerialNumber: 0L0I6DS
usb 4-2.2: new full speed USB device using uhci_hcd and address 5
usb 4-2.2: New USB device found, idVendor=043d, idProduct=00ff
usb 4-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2.2: Product: Lexmark 1200 Series
usb 4-2.2: Manufacturer: Lexmark
usb 4-2.2: SerialNumber: 0L0I6DS
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=190.147.47.217 DST=190.164.72.244 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=60828 DF PROTO=TCP SPT=3774 DPT=25451 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=188.62.189.171 DST=190.164.72.244 LEN=48 TOS=0x00 PREC=0x00 TTL=103 ID=19827 DF PROTO=TCP SPT=63583 DPT=5900 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=188.62.189.171 DST=190.164.72.244 LEN=48 TOS=0x00 PREC=0x00 TTL=103 ID=19948 DF PROTO=TCP SPT=63583 DPT=5900 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=190.147.47.217 DST=190.164.72.244 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=61717 DF PROTO=TCP SPT=4176 DPT=25451 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=190.147.47.217 DST=190.164.72.244 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=62608 DF PROTO=TCP SPT=4578 DPT=25451 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=190.147.47.217 DST=190.164.72.244 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=62610 DF PROTO=TCP SPT=4578 DPT=25451 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=124.237.121.93 DST=190.164.72.244 LEN=40 TOS=0x00 PREC=0x00 TTL=102 ID=256 PROTO=TCP SPT=6000 DPT=9415 WINDOW=16384 RES=0x00 SYN URGP=0
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=190.147.47.217 DST=190.164.72.244 LEN=48 TOS=0x00 PREC=0x00 TTL=110 ID=63489 DF PROTO=TCP SPT=4985 DPT=25451 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=201.93.195.46 DST=190.164.72.244 LEN=64 TOS=0x00 PREC=0x00 TTL=112 ID=6644 DF PROTO=TCP SPT=1541 DPT=19045 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=201.93.195.46 DST=190.164.72.244 LEN=64 TOS=0x00 PREC=0x00 TTL=112 ID=6647 DF PROTO=TCP SPT=1541 DPT=19045 WINDOW=65535 RES=0x00 SYN URGP=0
Shorewall:net2fw:DROP:IN=wlan0 OUT= MAC=00:1e:64:3b:54:18:00:01:5c:23:6b:81:08:00 SRC=201.93.195.46 DST=190.164.72.244 LEN=64 TOS=0x00 PREC=0x00 TTL=112 ID=6654 DF PROTO=TCP SPT=1541 DPT=19045 WINDOW=65535 RES=0x00 SYN URGP=0
[xguest@localhost ~]$