Imagenes de instalación de las versiones estables para Mageia y OpenMandriva.

OpenMandriva:

(Lx 5.0) 25/Noviembre/2023 - Anuncio, Descargas .
ROME 20/Julio/2024 - Anuncio, Descargas

Mageia (Mageia 9) 20/Agosto/2023 - Anuncio, Descargas.

Blogdrake recomienda descargar las imágenes de instalación (iso) vía torrent para evitar corrupción de datos, aprovechar mejor su ancho de banda y mejorar la difusión de las distribuciones.

No puedo dar formato a memoria USB

Enviado por Davidmet el 13 Septiembre, 2009 - 02:22

Hola

Estoy tratando de hacer funcionar un pendrive de 16GB nueva, mmmm pero me pasa lo siguiente

- Lo primero que hice fue esperar a que apareciera el ícono en el escritoro de gnome, pero no paso nada.
- Así que acudí directamente a Gparted, pero solamente reconoce el disco duro sda.
- Reinicie el pc con el pendrive puesto y nada.
- Listé lo siguiente:
[root@localhost davidmet]# lsusb Bus 007 Device 002: ID 0001:7778 Fry's Electronics Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 413c:8140 Dell Computer Corp. Wireless 360 Bluetooth Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub [root@localhost davidmet]# mount /dev/sda5 on / type ext4 (rw,noatime) none on /proc type proc (rw) /dev/sda1 on /mnt/win_c type fuseblk (rw,allow_other,blksize=4096) /dev/sda7 on /mnt/win_d type fuseblk (rw,allow_other,blksize=4096) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) [root@localhost davidmet]#

- No vi nada respecto a la pendrive (es GENERICA).
- Listé los dispositivos de /dev .... Sin pendrive puesto aparecen solo las particiones sdaX. Pero con el pendrive puesto aparece una sdb. Dije "te pille!!".
- Puse:
[root@localhost davidmet]# mkfs.ext4 /dev/sdb mke2fs 1.41.4 (27-Jan-2009) ¡/dev/sdb es todo el dispositivo, no sólo una partición! ¿Continuar de todas formas? (s,n) s mkfs.ext4: No se ha encontrado el medio mientras se intentaba determinar el tamaño del sistema de ficheros [root@localhost davidmet]# mkfs.ntfs /dev/sdb Could not open /dev/sdb: No se ha encontrado el medio. [root@localhost davidmet]#

- Y acá estoy, hice un intento desesperado en Window$ jaja, pero el administrador de dispositivos no termina el formateado con éxito (llega al 100% pero no logra cerrar el formato).

Algún idea de como formatearla?? Gracias.

» Enlace permanente»

Entra a tu cuenta o crea una para poder comentar.

frajaferza
Usuario

# 90021 ...

Escrito el 13 Septiembre, 2009 - 03:02

Si en ambos sistemas falla, se me ocurre que es un problema del dispositivo o del puerto USB (o del mother, que no lo controla bien).

Podrías probar conectándolo en otro puerto, otra PC, o decirnos si probaste en el mismo puerto/PC otro dispositivo similar con éxito (tengo una PC con un puerto que da correctamente corriente a los dispositivos y detecta bien un mouse óptico, pero va mal con los pendrives).

Saludos :)

----------------------------------------------------------------

Larga vida al metal

Uno de los YoungDrake

—

Saludos :)

----------------------------------------------------------------

Larga vida al metal

Entra a tu cuenta o crea una para poder comentar.

Davidmet
Usuario

# 90024 lo tendré que probar en

Escrito el 13 Septiembre, 2009 - 03:13

lo tendré que probar en otro pc entonces y aviso

Entra a tu cuenta o crea una para poder comentar.

Annubis

# 90031 Pega el resultado

Escrito el 13 Septiembre, 2009 - 11:59

De ejecutar dmesg justo después de conectar la memoria

Entra a tu cuenta o crea una para poder comentar.

Davidmet
Usuario

# 90034 EDITO el mensaje dmesg (era muy extenso)

Escrito el 14 Septiembre, 2009 - 00:55

EDITO lo anterior

Probé en 4 pc's diferentes y nada, lo mismo que en mi pc. Pero en un 5º pc con window$ pude formatear en fat32, pero sale que no tiene permisos de escritura. MMMMMMMMMM.....

Bueno... ya es un logro.

lo quiero montar nuevamente y ahora aparece lo siguiente
[root@localhost dev]# lsusb Bus 002 Device 003: ID 058f:1234 Alcor Micro Corp. Flash Drive

O sea, apareció. Pero:
[root@localhost dev]# mount /dev/sda5 on / type ext4 (rw,noatime) none on /proc type proc (rw) /dev/sda1 on /mnt/win_c type fuseblk (rw,allow_other,blksize=4096) /dev/sda7 on /mnt/win_d type fuseblk (rw,allow_other,blksize=4096) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) [root@localhost dev]#

Lo que significa que aún no me deja montar ni formatear (mkfs)

Avancé algo o todavía estoy pegado???

Entra a tu cuenta o crea una para poder comentar.

Annubis

# 90067 El lsusb sirve de poco en éste caso

Escrito el 14 Septiembre, 2009 - 11:51

Pues ahora no puedo ver la respuesta (me da igual que sea muy extenso, quiero verlo). Ahora que te reconoce el pincho USB, ejecuta nuevamente el resultado del comando dmesg.

Entra a tu cuenta o crea una para poder comentar.

Davidmet
Usuario

# 90262 Ahora no me pesca... dmesg

Escrito el 17 Septiembre, 2009 - 04:28

Linux version 2.6.29.6-desktop-1mnb (qateam@titan.mandriva.com) (gcc version 4.3.2 (GCC) ) #1 SMP Sun Jul 5 19:57:54 EDT 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000003f6c1400 (usable)
BIOS-e820: 000000003f6c1400 - 0000000040000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
DMI 2.4 present.
last_pfn = 0x3f6c1 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 377fe000 @ 7000-c000
RAMDISK: 37c0b000 - 37fef7c8
Allocated new RAMDISK: 00660000 - 00a447c8
Move RAMDISK from 0000000037c0b000 - 0000000037fef7c7 to 00660000 - 00a447c7
ACPI: RSDP 000FBF80, 0024 (r2 DELL )
ACPI: XSDT 3F6C2E00, 005C (r1 DELL M09 27D80912 ASL 61)
ACPI: FACP 3F6C2C9C, 00F4 (r4 DELL M09 27D80912 ASL 61)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 3F6C3400, 4E68 (r2 INT430 SYSFexxx 1001 INTL 20050624)
ACPI: FACS 3F6D1C00, 0040
ACPI: HPET 3F6C2F00, 0038 (r1 DELL M09 1 ASL 61)
ACPI: APIC 3F6C3000, 0068 (r1 DELL M09 27D80912 ASL 47)
ACPI: MCFG 3F6C2FC0, 003E (r16 DELL M09 27D80912 ASL 61)
ACPI: SLIC 3F6C309C, 0176 (r1 DELL M09 27D80912 ASL 61)
ACPI: OSFR 3F6C2600, 0086 (r1 DELL M09 27D80912 ASL 61)
ACPI: SSDT 3F6C1638, 04D4 (r1 PmRef CpuPm 3000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
126MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00008000 - 0000ef00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 000065c4a4] TEXT DATA BSS ==> [0000100000 - 000065c4a4]
#4 [000065d000 - 0000660000] INIT_PG_TABLE ==> [000065d000 - 0000660000]
#5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
#6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
#7 [0000660000 - 0000a447c8] NEW RAMDISK ==> [0000660000 - 0000a447c8]
#8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003f6c1
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0003f6c1
On node 0 totalpages: 259680
free_area_init_node: node 0, pgdat c0508f00, node_mem_map c1000000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 254 pages used for memmap
HighMem zone: 32197 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:b8000000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Allocating 40960 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257650
Kernel command line: BOOT_IMAGE=linux root=UUID=efc06f5d-1c9e-4a6c-887e-a5e7d31bdb81 resume=UUID=837c6f47-f13f-4ab7-b3c5-d30f0f73658b splash=silent vga=788
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 1596.275 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1019820k/1039108k available (2757k kernel code, 18544k reserved, 1606k data, 460k init, 129804k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc054a000 - 0xc05bd000 ( 460 kB)
.data : 0xc03b14ed - 0xc0542f08 (1606 kB)
.text : 0xc0100000 - 0xc03b14ed (2757 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.55 BogoMIPS (lpj=1596275)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20081204
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T5470 @ 1.60GHz stepping 0d
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3191.84 BogoMIPS (lpj=1595924)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Core(TM)2 Duo CPU T5470 @ 1.60GHz stepping 0d
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6384.39 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level MC
groups: 1 0
net_namespace: 1056 bytes
Booting paravirtualized kernel on bare hardware
Time: 23:31:26 Date: 09/16/09
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
PCI: MCFG area at f8000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 3F6D1C80, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 64bit mmio: [0xf6e00000-0xf6efffff]
pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff]
pci 0000:00:02.0: reg 20 io port: [0xefe8-0xefef]
pci 0000:00:02.1: reg 10 64bit mmio: [0xf6f00000-0xf6ffffff]
pci 0000:00:1a.0: reg 20 io port: [0x6f60-0x6f7f]
pci 0000:00:1a.1: reg 20 io port: [0x6f80-0x6f9f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfed1c400-0xfed1c7ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf6dfc000-0xf6dfffff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x6f00-0x6f1f]
pci 0000:00:1d.1: reg 20 io port: [0x6f20-0x6f3f]
pci 0000:00:1d.2: reg 20 io port: [0x6f40-0x6f5f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfed1c000-0xfed1c3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0900 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0c80 (mask 003f)
pci 0000:00:1f.2: reg 10 io port: [0x6e70-0x6e77]
pci 0000:00:1f.2: reg 14 io port: [0x6e78-0x6e7b]
pci 0000:00:1f.2: reg 18 io port: [0x6e80-0x6e87]
pci 0000:00:1f.2: reg 1c io port: [0x6e88-0x6e8b]
pci 0000:00:1f.2: reg 20 io port: [0x6ea0-0x6eaf]
pci 0000:00:1f.2: reg 24 io port: [0xeff0-0xefff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0xf6dfbf00-0xf6dfbfff]
pci 0000:00:1f.3: reg 20 io port: [0x10c0-0x10df]
pci 0000:0c:00.0: reg 10 64bit mmio: [0xf6cf0000-0xf6cfffff]
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.1: bridge 32bit mmio: [0xf6c00000-0xf6cfffff]
pci 0000:09:00.0: reg 10 io port: [0xde00-0xdeff]
pci 0000:09:00.0: reg 18 64bit mmio: [0xf6aff000-0xf6afffff]
pci 0000:09:00.0: reg 20 64bit mmio: [0xf0000000-0xf000ffff]
pci 0000:09:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: PME# disabled
pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff]
pci 0000:00:1c.5: bridge 32bit mmio: [0xf6a00000-0xf6bfffff]
pci 0000:00:1c.5: bridge 64bit mmio pref: [0xf0000000-0xf00fffff]
pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:03:01.0: supports D1 D2
pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:01.1: reg 10 32bit mmio: [0xf69ff800-0xf69fffff]
pci 0000:03:01.1: supports D1 D2
pci 0000:03:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.1: PME# disabled
pci 0000:03:01.2: reg 10 32bit mmio: [0xf69ff600-0xf69ff6ff]
pci 0000:03:01.2: supports D1 D2
pci 0000:03:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.2: PME# disabled
pci 0000:03:01.3: reg 10 32bit mmio: [0xf69ff700-0xf69ff7ff]
pci 0000:03:01.3: supports D1 D2
pci 0000:03:01.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:01.3: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xf6900000-0xf69fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *3
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: io resource (0x1000-0x1005) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:09: io resource (0x1008-0x100f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0a: io resource (0x1006-0x1007) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0a: io resource (0x100a-0x1059) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0a: io resource (0x1060-0x107f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp 00:0a: io resource (0x1010-0x102f) overlaps 0000:00:1f.0 BAR 7 (0x1000-0x107f), disabling
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
system 00:05: ioport range 0xc80-0xcff could not be reserved
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:09: ioport range 0x900-0x97f has been reserved
system 00:09: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0xf400-0xf4fe has been reserved
system 00:0a: ioport range 0x1080-0x10bf has been reserved
system 00:0a: ioport range 0x10c0-0x10df has been reserved
system 00:0a: ioport range 0x809-0x809 has been reserved
system 00:0b: iomem range 0x0-0x9efff could not be reserved
system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved
system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
system 00:0b: iomem range 0x100000-0x3f6c13ff could not be reserved
system 00:0b: iomem range 0x3f6c1400-0x3f6fffff has been reserved
system 00:0b: iomem range 0x3f700000-0x3f7fffff has been reserved
system 00:0b: iomem range 0xffe00000-0xffffffff has been reserved
system 00:0b: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:0b: iomem range 0xfec00000-0xfec0ffff has been reserved
system 00:0b: iomem range 0xfee00000-0xfee0ffff has been reserved
system 00:0b: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:0b: iomem range 0xfeda0000-0xfeda3fff has been reserved
system 00:0b: iomem range 0xfeda4000-0xfeda4fff has been reserved
system 00:0b: iomem range 0xfeda5000-0xfeda5fff has been reserved
system 00:0b: iomem range 0xfeda6000-0xfeda6fff has been reserved
system 00:0b: iomem range 0xfed18000-0xfed1bfff has been reserved
system 00:0b: iomem range 0xf8000000-0xfbffffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:0b
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:0c
pci 0000:00:1c.1: IO window: disabled
pci 0000:00:1c.1: MEM window: 0xf6c00000-0xf6cfffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.5: PCI bridge, secondary bus 0000:09
pci 0000:00:1c.5: IO window: 0xd000-0xdfff
pci 0000:00:1c.5: MEM window: 0xf6a00000-0xf6bfffff
pci 0000:00:1c.5: PREFETCH window: 0x000000f0000000-0x000000f00fffff
pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04
pci 0000:03:01.0: IO window: 0x002000-0x0020ff
pci 0000:03:01.0: IO window: 0x002400-0x0024ff
pci 0000:03:01.0: PREFETCH window: 0x50000000-0x53ffffff
pci 0000:03:01.0: MEM window: 0x54000000-0x57ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
pci 0000:00:1e.0: IO window: 0x2000-0x2fff
pci 0000:00:1e.0: MEM window: 0xf6900000-0xf69fffff
pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x00000053ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:03:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:0b: resource 0 mem: [0x0-0x0]
pci_bus 0000:0b: resource 1 mem: [0x0-0x0]
pci_bus 0000:0b: resource 2 mem: [0x0-0x0]
pci_bus 0000:0b: resource 3 mem: [0x0-0x0]
pci_bus 0000:0c: resource 0 mem: [0x0-0x0]
pci_bus 0000:0c: resource 1 mem: [0xf6c00000-0xf6cfffff]
pci_bus 0000:0c: resource 2 mem: [0x0-0x0]
pci_bus 0000:0c: resource 3 mem: [0x0-0x0]
pci_bus 0000:09: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:09: resource 1 mem: [0xf6a00000-0xf6bfffff]
pci_bus 0000:09: resource 2 mem: [0xf0000000-0xf00fffff]
pci_bus 0000:09: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 io: [0x2000-0x2fff]
pci_bus 0000:03: resource 1 mem: [0xf6900000-0xf69fffff]
pci_bus 0000:03: resource 2 mem: [0x50000000-0x53ffffff]
pci_bus 0000:03: resource 3 io: [0x00-0xffff]
pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:04: resource 0 io: [0x2000-0x20ff]
pci_bus 0000:04: resource 1 io: [0x2400-0x24ff]
pci_bus 0000:04: resource 2 mem: [0x50000000-0x53ffffff]
pci_bus 0000:04: resource 3 mem: [0x54000000-0x57ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
it is
Freeing initrd memory: 3985k freed
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1253143885.817:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Hook version: 2.6.29 2009/03/24
msgmni has been set to 1746
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.5: setting latency timer to 64
pcieport-driver 0000:00:1c.5: irq 26 for MSI/MSI-X
vesafb: framebuffer at 0xe0000000, mapped to 0xf8080000, using 1875k, total 7616k
vesafb: mode is 800x600x16, linelength=1600, pages=6
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1
input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2
PM: Resume from partition UUID=837c6f47-f13f-4ab7-b3c5-d30f0f73658b
PM: Checking hibernation image.
PM: Error -6 checking image file
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 9:140:555
pci_link PNP0C0F:06: hash matches
acpi PNP0C01:01: hash matches
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 460k freed
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x6e70 ctl 0x6e78 bmdma 0x6ea0 irq 17
ata2: SATA max UDMA/133 cmd 0x6e80 ctl 0x6e88 bmdma 0x6ea8 irq 17
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: WDC WD1200BEVT-75ZCT2, 11.01A11, max UDMA/133
ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 0/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVT-7 11.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 0)
ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-L633B, D200, max UDMA/100
ata2.00: applying bridge limits
ata2.00: configured for UDMA/100
scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-L633B D200 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ohci1394 0000:03:01.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[f69ff800-f69fffff] Max Packet=[2048] IR/IT contexts=[4/4]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[314fc00015d2cde1]
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT4-fs: barriers enabled
kjournald2 starting: pid 507, dev sda5:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda5 with ordered data mode
TomoyoLinux Mandatory Access Control disabled by default.
You need to install ccs-tools if you want to enable it.
ACPI: AC Adapter [AC] (on-line)
ACPI: SSDT 3F6C2176, 0202 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 3F6C1B0C, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 3F6C2378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 3F6C20F1, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [CPU1] (supports 8 throttling states)
Marking TSC unstable due to TSC halts in idle
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:31/input/input3
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
ACPI Warning (nspredef-0434): \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) [20081204]
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:36/input/input4
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
ACPI: WMI: Mapper loaded
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THM] (40 C)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5
ACPI: Lid Switch [LID]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input6
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input7
ACPI: Sleep Button (CM) [SBTN]
Linux agpgart interface v0.103
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f60
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.6-desktop-1mnb uhci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f80
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.6-desktop-1mnb uhci_hcd
usb usb2: SerialNumber: 0000:00:1a.1
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.29.6-desktop-1mnb uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f20
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.29.6-desktop-1mnb uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.1
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.29.6-desktop-1mnb uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.29.6-desktop-1mnb ehci_hcd
usb usb6: SerialNumber: 0000:00:1a.7
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.29.6-desktop-1mnb ehci_hcd
usb usb7: SerialNumber: 0000:00:1d.7
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
Non-volatile memory driver v1.3
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: New USB device found, idVendor=413c, idProduct=8140
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
Bluetooth: Core ver 2.14
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.4
usbcore: registered new interface driver btusb
EXT4 FS on sda5, internal journal on sda5:8
usb 3-1: new low speed USB device using uhci_hcd and address 2
usb 3-1: New USB device found, idVendor=04f3, idProduct=0210
usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 3-1: Product: PS/2+USB Mouse
usb 3-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb3/3-1/3-1:1.0/input/input8
generic-usb 0003:04F3:0210.0001: input,hidraw0: USB HID v1.11 Mouse [PS/2+USB Mouse] on usb-0000:00:1d.0-1/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
fuse init (API version 7.11)
yenta_cardbus 0000:03:01.0: CardBus bridge found [1028:0298]
yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x04b8, PCI irq 16
yenta_cardbus 0000:03:01.0: Socket status: 30000006
pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #04 to #07
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xf6900000 - 0xf69fffff
yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Adding 1108444k swap on /dev/sda6. Priority:-1 extents:1 across:1108444k
Clocksource tsc unstable (delta = -81187044 ns)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
input: PC Speaker as /devices/platform/pcspkr/input/input9
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ath5k 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ath5k 0000:0c:00.0: setting latency timer to 64
ath5k 0000:0c:00.0: registered as 'phy0'
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:09:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:09:00.0: setting latency timer to 64
r8169 0000:09:00.0: irq 27 for MSI/MSI-X
eth0: RTL8102e at 0xf8078000, 00:22:19:e0:d8:cd, XID 24a00000 IRQ 27
wmaster0 (ath5k): not using net_device_ops yet
phy0: Selected rate control algorithm 'minstrel'
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:03:01.3 [1180:0843] (rev 11)
ricoh-mmc: Controller is now disabled.
wlan0 (ath5k): not using net_device_ops yet
ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:03:01.2: SDHCI controller found [1180:0822] (rev 21)
sdhci-pci 0000:03:01.2: PCI INT C -> GSI 17 (level, low) -> IRQ 17
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:03:01.2] using DMA
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input10
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/input/input11
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/input/input12
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.0: irq 28 for MSI/MSI-X
[drm] Initialized i915 1.6.0 20080730 on minor 0
Bluetooth: L2CAP ver 2.11
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.10
Bridge firewalling registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
cfg80211: Calling CRDA for country: ES
cfg80211: Regulatory domain changed to country: ES
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
(5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
r8169: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: Calling CRDA for country: ES
NET: Registered protocol family 17
wlan0: authenticate with AP 00:0b:b4:00:39:69
wlan0: authenticated
wlan0: associate with AP 00:0b:b4:00:39:69
wlan0: RX AssocResp from 00:0b:b4:00:39:69 (capab=0x411 status=0 aid=1)
wlan0: associated
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
martian source 255.255.255.255 from 192.168.0.1, on dev wlan0
ll header: ff:ff:ff:ff:ff:ff:00:0b:b4:00:39:69:08:00
usbcore: registered new interface driver usblp
wlan0: no IPv6 routers present
ip_tables: (C) 2000-2006 Netfilter Core Team
usb 7-2: new high speed USB device using ehci_hcd and address 3
usb 7-2: New USB device found, idVendor=058f, idProduct=1234
usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-2: Product: Mass Storage Device
usb 7-2: Manufacturer: Alcor Micro
usb 7-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning

Espero que sirva

Entra a tu cuenta o crea una para poder comentar.

Annubis

# 90281 Hmmm...

Escrito el 17 Septiembre, 2009 - 07:20

¿Qué sistema de ficheros tiene el pendrive? Cuando lo quitas del PC, ¿lo desmontas primero? El sistema está esperando a que el dispositivo escanee algo. ¿Por casualidad no lo habrás montado en Windorls y quitado sin extraerlo primero? Si es así, inicia con Windows, mete el pendrive, espera a que se monte y o bien apaga el sistema sin quitarlo, o extráelo de forma segura.

Entra a tu cuenta o crea una para poder comentar.

Aledec90
Usuario

# 90049 Haz un "fdisk -l /dev/sdb",

Escrito el 14 Septiembre, 2009 - 04:22

Haz un "fdisk -l /dev/sdb", para mostrar la tabla de particiones del dispositivo sdb, en caso que no obtengas salida alguna referente a particiones, deberas crear alguna con "cfdisk /dev/sdb"<< ten mucho cuidado con esta operación.

Saludos cordiales.

—

[CENTER][COLOR="Blue"][B]"...el número de instalaciones Unix ha alcanzado el número de 10, y esperamos que aumente..."
Dennis Ritchie y Ken Thompson, Junio 1972[/B][/COLOR][/CENTER]
[CENTER][IMG]http://images.mandriva.com/websiteBanners/PIRATE-EN.gif[

Entra a tu cuenta o crea una para poder comentar.

Davidmet
Usuario

# 90050 No funciona

Escrito el 14 Septiembre, 2009 - 04:54

[root@localhost dev]# fdisk -l /dev/sdb
[root@localhost dev]#

[root@localhost dev]# cfdisk /dev/sdb

ERROR MUY GRAVE: No se puede abrir la unidad de disco
Pulse una tecla para salir de cfdisk

Exelente!.... estoy comenzando a creer que viene mala de fábrica.

Entra a tu cuenta o crea una para poder comentar.

Davidmet
Usuario

# 90052 Empíricamente

Escrito el 14 Septiembre, 2009 - 05:15

Empíricamente comprobado!!

Se me cayó el pendrive al suelo, lo conecte al pc y funcionó, reconoció las particiones y todo..... pero luego de 1 min volvió a morir.

Efectivamente viene mal de fábrica (así parece)

Entra a tu cuenta o crea una para poder comentar.

vfmmeo
Usuario

# 90058 ¿Se te cayó?

Escrito el 14 Septiembre, 2009 - 09:06

Si, claro...

A mí también "se me caen" cosas que no funcionan...

¿Cerramos?

Atentamente,
El BOFH anteriormente conocido como vfmmeo. No había nadie mejor disponible.

Sígueme o aparta.

—

Atentamente,
El BOFH anteriormente conocido como vfmmeo. No había nadie mejor disponible.

Sígueme o aparta.

Entra a tu cuenta o crea una para poder comentar.

Davidmet
Usuario

# 90261 mmm

Escrito el 17 Septiembre, 2009 - 04:30

Bueno... yo me creo... pero da lo mismo, se golpeó y funcionó

Quiero confirmar si está mala de fábrica, así que por ahora no cerremos por favor.

Entra a tu cuenta o crea una para poder comentar.

BuscaDrake 4

Navegación

Bienvenido a BlogDRAKE

Discusiones activas

Envíos recientes de blog

Nuevas discusiones

Blogs Oficiales

Planeta BlogDRAKE

Otros Blogs

Bilo y Nano

Actualizaciones de seguridad

NO a las Patentes de Software

Licencia

Feed

No puedo dar formato a memoria USB

Opciones de visualización de comentarios

# 90021 ...

# 90024 lo tendré que probar en

# 90031 Pega el resultado

# 90034 EDITO el mensaje dmesg (era muy extenso)

# 90067 El lsusb sirve de poco en éste caso

# 90262 Ahora no me pesca... dmesg

# 90281 Hmmm...

# 90049 Haz un "fdisk -l /dev/sdb",

# 90050 No funciona

# 90052 Empíricamente

# 90058 ¿Se te cayó?

# 90261 mmm

Opciones de visualización de comentarios