Imagenes de instalación de las versiones estables para Mageia y OpenMandriva.
OpenMandriva: Mageia (Mageia 9) 20/Agosto/2023 - Anuncio, Descargas.
Blogdrake recomienda descargar las imágenes de instalación (iso) vía torrent para evitar corrupción de datos, aprovechar mejor su ancho de banda y mejorar la difusión de las distribuciones.
El sistema se congela aleatoriamente
Desde que instalé Mandriva 2010.1, primero en su versión Free, y luego en la versión One (ambas con el entorno KDE), he experimentado como cada cierto tiempo, al estar haciendo cosas como configurar el aspecto de Plasma, configurando los repositorios, o navegando por Internet a la vez que chateo (como en este último caso), de buenas a primeras, el sistema se queda totalmente congelado, no responden ni ratón ni teclado y la única forma de recuperarlo es dándole el botonazo.
También he observado que tras el botonazo para recuperar el sistema, la máquina durante un periodo de tiempo es incapaz de dar señal de video al monitor, imposibilitando durante el mismo el arranque de cualquier sistema, ni siquiera el post de la BIOS.
Al principio pensé que podría ser ocasionado por el driver libre de Nvidia, ahora estoy usando el driver propietario de los repos, y ha vuelto a ocurrirme... lo que quisiera es que me ayudasen de forma guiada para probar el estado de mi hardware y saber qué es lo que puede estar provocando estos cuelgues.
Al instalar el driver propietario de Nvidia de los repos probé a dejar el sistema una tarde entera corriendo a ver si seguía colgándose, y no se colgó... así que di el problema por resuelto hasta que hoy me ha vuelto a ocurrir.
Quisiera una guía de comandos a usar para facilitarles toda la información necesaria.
- Entra a tu cuenta o crea una para poder comentar.
# 106208 ¿Cómo de congelado se queda?
Responde a Shit+Alt+REISUB?
Usuario
# 106211 Congelado completamente
Congelado completamente congelado, que no responde nada, ninguna combinación de teclas ni nada, y lo único que hace que eso cambie es el botonazo a la máquina.
Por cierto, ¿cual es la tecla REISUB? :S
Sólo se respeta a los que combaten, sólo vencen los que luchan, sólo triunfan los que resisten
Usuario
# 106214 ...
REISUB no es una tecla, se refiere a las teclas R, E, I, S, U y B.
Usuario
# 106215 Ajam, pues no he probado tal
Ajam, pues no he probado tal combinación, si vuelve a ocurrir lo probaré, aunque dudo que tenga ningún efecto, ya que el teclado no responde a nada, intenté el Ctrl+Alt+Backspace para reiniciar el servidor gráfico y el Ctrl+Alt+Supr pero nada, no tenían efecto alguno...
Sólo se respeta a los que combaten, sólo vencen los que luchan, sólo triunfan los que resisten
# 106217 ...
http://blogdrake.net/node/17436#comment-82564
Usuario
# 106291 La combinación de teclas que
La combinación de teclas que habías citado no tienen efecto alguno una vez producido el cuelgue.
Sólo se respeta a los que combaten, sólo vencen los que luchan, sólo triunfan los que resisten
BOFH
# 106257 ...
Lo primordial es la salida de dmesg y los logs al momento del congelamiento, asi tambien que procesos estas corriendo.
¿Quien es Jesucristo?
Usuario
# 106268 Hasta ahora en el momento del
Hasta ahora en el momento del congelamiento no me respondía ni teclado ni ratón, así que no sé cómo voy a reportar la salida de "dmesg"...
Sólo se respeta a los que combaten, sólo vencen los que luchan, sólo triunfan los que resisten
# 106279 Cuando reinicies xD
Cuando reinicies xD
Usuario
# 106289 Pues ya sé lo que me toca
Pues ya sé lo que me toca hacer cuando vuelva a iniciarlo, porque esta tarde me ha ocurrido dos veces...
Sólo se respeta a los que combaten, sólo vencen los que luchan, sólo triunfan los que resisten
Usuario
# 106296 Salida de "dmesg"
Salida del comando "dmesg" justo después del último cuelgue (hace unos instantes):
[varyheavy@localhost ~]$ dmesg at 0
Linux version 2.6.33.5-desktop586-2mnb (herton@n2.mandriva.com) (gcc version 4.4.3 (GCC) ) #1 SMP Thu Jun 17 19:54:13 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data)
BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3ffc0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 00c00000
found SMP MP-table at [c00ff780] ff780
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 15000-1b000
RAMDISK: 37abb000 - 37fef379
Allocated new RAMDISK: 00771000 - 00ca5379
Move RAMDISK from 0000000037abb000 - 0000000037fef378 to 00771000 - 00ca5378
ACPI: RSDP 000fb5a0 00014 (v00 ACPIAM)
ACPI: RSDT 3ffc0000 00034 (v01 A M I OEMRSDT 08000511 MSFT 00000097)
ACPI: FACP 3ffc0200 00081 (v01 A M I OEMFACP 08000511 MSFT 00000097)
ACPI: DSDT 3ffc0400 047CB (v01 A0005 A0005092 00000092 INTL 02002026)
ACPI: FACS 3ffce000 00040
ACPI: APIC 3ffc0390 00070 (v01 A M I OEMAPIC 08000511 MSFT 00000097)
ACPI: OEMB 3ffce040 00060 (v01 A M I AMI_OEM 08000511 MSFT 00000097)
ACPI: MCFG 3ffc4bd0 0003C (v01 A M I OEMMCFG 08000511 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
139MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00017000 - 0001de80
(14 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000100000 - 000076cce4] TEXT DATA BSS ==> [0000100000 - 000076cce4]
#3 [000076d000 - 0000770240] BRK ==> [000076d000 - 0000770240]
#4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
#5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
#6 [000009fc00 - 00000f1710] BIOS reserved ==> [000009fc00 - 00000f1710]
#7 [00000f1850 - 00000ff780] BIOS reserved ==> [00000f1850 - 00000ff780]
#8 [00000f1710 - 00000f1850] MP-table mpc ==> [00000f1710 - 00000f1850]
#9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#11 [0000015000 - 0000017000] PGTABLE ==> [0000015000 - 0000017000]
#12 [0000771000 - 0000ca5379] NEW RAMDISK ==> [0000771000 - 0000ca5379]
#13 [0000017000 - 000001e000] BOOTMAP ==> [0000017000 - 000001e000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0003ffc0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003ffc0
On node 0 totalpages: 261967
free_area_init_node: node 0, pgdat c0614400, node_mem_map c1001200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 280 pages used for memmap
HighMem zone: 35498 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1c00000 s35416 r0 d21928 u2097152
pcpu-alloc: s35416 r0 d21928 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259919
Kernel command line: BOOT_IMAGE=linux root=LABEL=Mandriva resume=UUID=184fd3d6-5b00-48e7-af46-51d2ce21e11e splash=silent vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:0003ffc0)
Memory: 1026304k/1048320k available (3274k kernel code, 21080k reserved, 2041k data, 524k init, 143112k highmem)
virtual kernel memory layout:
fixmap : 0xffd54000 - 0xfffff000 (2732 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc0632000 - 0xc06b5000 ( 524 kB)
.data : 0xc0432bdb - 0xc0631348 (2041 kB)
.text : 0xc0100000 - 0xc0432bdb (3274 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3065.902 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6131.80 BogoMIPS (lpj=3065902)
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 15176 entries in 30 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 01
Brought up 1 CPUs
Total of 1 processors activated (6131.80 BogoMIPS).
devtmpfs: initialized
Time: 19:10:52 Date: 08/01/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - AB, should be A7 (20091214/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x40010000-0xffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xccffc000-0xccffffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x9800-0x981f]
pci 0000:00:1d.1: reg 20: [io 0xa000-0xa01f]
pci 0000:00:1d.2: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1d.3: reg 20: [io 0xa800-0xa81f]
pci 0000:00:1d.7: reg 10: [mem 0xccffbc00-0xccffbfff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10: [io 0x9400-0x9407]
pci 0000:00:1f.2: reg 14: [io 0x9000-0x9003]
pci 0000:00:1f.2: reg 18: [io 0x8800-0x8807]
pci 0000:00:1f.2: reg 1c: [io 0x8400-0x8403]
pci 0000:00:1f.2: reg 20: [io 0x8000-0x800f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xcd000000-0xcdffffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xcfee0000-0xcfefffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xcd000000-0xcfefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:03:01.0: reg 10: [mem 0xcffff800-0xcfffffff]
pci 0000:03:01.0: reg 14: [io 0xe800-0xe87f]
pci 0000:03:01.0: supports D2
pci 0000:03:01.0: PME# supported from D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:02.0: reg 10: [io 0xe400-0xe4ff]
pci 0000:03:02.0: reg 14: [mem 0xcffff400-0xcffff4ff]
pci 0000:03:02.0: supports D1 D2
pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:02.0: PME# disabled
pci 0000:03:04.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:03:04.0: reg 14: [mem 0xcffff000-0xcffff0ff]
pci 0000:03:04.0: reg 30: [mem 0xcffe0000-0xcffeffff pref]
pci 0000:03:04.0: supports D1 D2
pci 0000:03:04.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:04.0: PME# disabled
pci 0000:03:05.0: reg 10: [mem 0xcfffec00-0xcfffecff]
pci 0000:03:05.0: reg 14: [io 0xd800-0xd807]
pci 0000:03:05.0: reg 18: [io 0xd400-0xd4ff]
pci 0000:03:05.0: supports D2
pci 0000:03:05.0: PME# supported from D2 D3hot D3cold
pci 0000:03:05.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xd000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
system 00:07: [io 0x0680-0x06ff] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0480-0x04bf] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xffc00000-0xfff7ffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0x3fffffff] could not be reserved
pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xcd000000-0xcfefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io 0xd000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xcfffffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xcd000000-0xcfefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0x40000000-0x401fffff]
pci_bus 0000:02: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xcff00000-0xcfffffff]
pci_bus 0000:03: resource 3 [io 0x0000-0xffff]
pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 16 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5328k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1280689852.390:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1736
Sólo se respeta a los que combaten, sólo vencen los que luchan, sólo triunfan los que resisten
Usuario
# 106298 ...
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
vesafb: framebuffer at 0xd0000000, mapped to 0xf7c80000, using 1875k, total 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:d2b0
vesafb: pmi: set display start = c00cd2e6, set palette = c00cd350
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
PNP: PS/2 controller doesn't have KBD irq; using default 1
isapnp: Scanning for PnP cards...
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
PM: Checking image partition UUID=184fd3d6-5b00-48e7-af46-51d2ce21e11e
isapnp: No Plug & Play device found
psmouse serio1: ID: 10 00 64
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input0
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 6:717:191
rtc_cmos 00:03: setting system clock to 2010-08-01 19:10:53 UTC (1280689853)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 524k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xccffbc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.5-desktop586-2mnb ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.5-desktop586-2mnb uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33.5-desktop586-2mnb uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33.5-desktop586-2mnb uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.33.5-desktop586-2mnb uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x9400 ctl 0x9000 bmdma 0x8000 irq 19
ata4: SATA max UDMA/133 cmd 0x8800 ctl 0x8400 bmdma 0x8008 irq 19
ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/100
ata3.00: 488397168 sectors, multi 16: LBA48
ata1.00: ATAPI: LITE-ON DVDRW SOHW-1633S, BPSA, max UDMA/66
ata1.01: ATAPI: ASUS DVD-E616P3H, 1.04, max UDMA/33
ata1.00: limited to UDMA/33 due to 40-wire cable
ata3.00: configured for UDMA/100
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1633S BPSA PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM ASUS DVD-E616P3H 1.04 PQ: 0 ANSI: 5
scsi 2:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: New USB device found, idVendor=03f0, idProduct=0b0c
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1
generic-usb 0003:03F0:0B0C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input2
generic-usb 0003:03F0:0B0C.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=058f, idProduct=9360
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: USB Reader
usb 5-1: Manufacturer:
usb 5-1: SerialNumber: 2004888
EXT4-fs (sda5): orphan cleanup on readonly fs
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3538978
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3538968
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3538963
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3538962
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3538966
EXT4-fs (sda5): 5 orphan inodes deleted
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode
Tomoyo security MAC extension available but disabled by default. If you want to
enable and use it, ccs-tools package must be installed.
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: New USB device found, idVendor=0930, idProduct=6540
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: USB Flash Memory
usb 1-5: SerialNumber: 09A0DC60408058B2
udev: starting version 153
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
ppdev: user-space parallel port driver
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
loop: module loaded
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22 09:18:20 PDT 2010
Floppy drive(s): fd0 is unknown type 12 (usb?)
fuse init (API version 7.13)
floppy0: no floppy controllers found
vboxguest: VirtualBox Guest PCI device not found.
Adding 1050800k swap on /dev/sda6. Priority:-1 extents:1 across:1050800k
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
iTCO_vendor_support: vendor-support=0
Initializing USB Mass Storage driver...
scsi4 : usb-storage 5-1:1.0
scsi5 : usb-storage 1-5:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
8139too Fast Ethernet driver 0.9.28
8139too 0000:03:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0xf7f3c400, 00:13:d4:9c:9c:46, IRQ 21
8139too 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
eth1: RealTek RTL8139 at 0xf7f76000, 00:80:5a:62:72:c1, IRQ 16
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 0:0:1:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
ohci1394 0000:03:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
intel_rng: FWH not detected
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20] MMIO=[cffff800-cfffffff] Max Packet=[2048] IR/IT contexts=[4/8]
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 26 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000058fd62]
ondemand governor failed, too long transition latency of HW, fallback to performance governor
scsi 5:0:0:0: Direct-Access USB Flash Memory 6.50 PQ: 0 ANSI: 0 CCS
sd 5:0:0:0: Attached scsi generic sg3 type 0
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
sd 4:0:0:0: Attached scsi generic sg4 type 0
scsi 5:0:0:1: CD-ROM USB Flash Memory 6.50 PQ: 0 ANSI: 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
sd 4:0:0:1: Attached scsi generic sg5 type 0
sr2: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray
sr 5:0:0:1: Attached scsi CD-ROM sr2
sr 5:0:0:1: Attached scsi generic sg6 type 5
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
sd 4:0:0:2: Attached scsi generic sg7 type 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
sd 4:0:0:3: Attached scsi generic sg8 type 0
sd 5:0:0:0: [sdb] 3894975 512-byte logical blocks: (1.99 GB/1.85 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: 45 00 00 08
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 5:0:0:0: [sdb] Assuming drive cache: write through
sd 5:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:0: [sdc] Attached SCSI removable disk
sd 4:0:0:1: [sdd] Attached SCSI removable disk
sd 4:0:0:2: [sde] Attached SCSI removable disk
sd 4:0:0:3: [sdf] Attached SCSI removable disk
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 00 e0 00 00 02 00
end_request: I/O error, dev sr2, sector 4195200
Buffer I/O error on device sr2, logical block 524400
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 00 e0 00 00 02 00
end_request: I/O error, dev sr2, sector 4195200
Buffer I/O error on device sr2, logical block 524400
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 10 00 00 02 00
end_request: I/O error, dev sr2, sector 4195392
Buffer I/O error on device sr2, logical block 524424
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 10 00 00 02 00
end_request: I/O error, dev sr2, sector 4195392
Buffer I/O error on device sr2, logical block 524424
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 12 00 00 02 00
end_request: I/O error, dev sr2, sector 4195400
Buffer I/O error on device sr2, logical block 524425
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 12 00 00 02 00
end_request: I/O error, dev sr2, sector 4195400
Buffer I/O error on device sr2, logical block 524425
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 12 00 00 02 00
end_request: I/O error, dev sr2, sector 4195400
Buffer I/O error on device sr2, logical block 524425
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 12 00 00 02 00
end_request: I/O error, dev sr2, sector 4195400
Buffer I/O error on device sr2, logical block 524425
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 12 00 00 02 00
end_request: I/O error, dev sr2, sector 4195400
Buffer I/O error on device sr2, logical block 524425
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 12 00 00 02 00
end_request: I/O error, dev sr2, sector 4195400
Buffer I/O error on device sr2, logical block 524425
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 12 00 00 02 00
end_request: I/O error, dev sr2, sector 4195400
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 04 00 00 02 00
end_request: I/O error, dev sr2, sector 4195344
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 10 00 00 02 00
end_request: I/O error, dev sr2, sector 4195392
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 12 00 00 02 00
end_request: I/O error, dev sr2, sector 4195400
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 12 00 00 02 00
end_request: I/O error, dev sr2, sector 4195400
sr 5:0:0:1: [sr2] Unhandled sense code
sr 5:0:0:1: [sr2] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE
sr 5:0:0:1: [sr2] Sense Key : Hardware Error [current]
sr 5:0:0:1: [sr2] Add. Sense: No additional sense information
sr 5:0:0:1: [sr2] CDB: Read(10): 28 00 00 10 01 12 00 00 02 00
end_request: I/O error, dev sr2, sector 4195400
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16135 buckets, 64540 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ip_set version 4 loaded
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
xt_time: kernel timezone is +0200
eth1: no IPv6 routers present
u32 classifier
Actions configured
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
He comprobado que el sistema se cuelga antes si está Firefox en ejecución, ya que se cuelga aproximadamente a los 2-3 minutos (a veces menos) de abrir Firefox, no así cuando no se está ejecutando, lo que me hace sospechar de que ocurre en cuanto se consume cierta cantidad de RAM.
Este mensaje lo escribo desde el portátil ya que el PC en el que ocurre ha vuelto ha colgarse.
Sólo se respeta a los que combaten, sólo vencen los que luchan, sólo triunfan los que resisten
# 106301 La próxima usa pastebin, por favor :)
Una pregunta, ¿qué es /dev/sr2? ¿Tienes 3 unidades de CD/DVD? Lo digo porque salen un montón de errores de entrada/salida relacionados con /dev/sr2.
BOFH
# 106302 OT
Si usa Pastebin y luego desaperece lo que pego la consulta ya no servira para futuras busquedas.
¿Quien es Jesucristo?
Usuario
# 106307 No sé en este momento qué
No sé en este momento qué dispositivo es /dev/sr2 :S. Tengo 2 lectores, ambos de CD/DVD, solo que uno es solo lector y el otro es además grabador. Por otra parte, la máquina tiene también un lector de tarjetas integrado.
En el momento de los cuelgues no estaba usando de todas formas ninguna de las dos unidades de CD/DVD, tampoco ningún otro dispositivo ni en el lector de tarjetas ni en los USB ni nada (salvo el teclado).
Sólo se respeta a los que combaten, sólo vencen los que luchan, sólo triunfan los que resisten
# 106312 Hmmmm
Pues ahí dice que /dev/sr2 está dando cascotazos. ¿Puedes probar desconectando de la placa los 2 dispositivos? ¿Podrías pasarla también unos tests al disco duro (con smartmontools) y a la memoria RAM (con memtest)? Tal vez estemos ante un error de hardware.
Usuario
# 106325 El memtest ya se lo pasé
El memtest ya se lo pasé antes de instalar Mandriva 2010.1, y ningún error. Después, antes de la reinstalación, se lo pasé otras dos veces, y no dio errores. Al disco duro también le hice un chequeo con Seagate SeaTools, y todo fue bien aparentemente.
Y lo que me sugieres es... ¿que pruebe a abrir la máquina y desconectar los dos lectores?
Sólo se respeta a los que combaten, sólo vencen los que luchan, sólo triunfan los que resisten
# 106331 Si no estás haciendo nada con ellos no deberían ser el problema
El SeaTools no se lo que hace. Yo lo que quiero es ver el estado SMART del disco. Por cierto, me parece más preciso /var/log/syslog, que dmesg, ya que muestra la hora y la fecha.
BOFH
# 106270 Me ha pasado igual, al hacer
Me ha pasado igual, al hacer una instalación limpia en un disco de pruebas.
Tengo actualizado por los repos cada versión desde 2009.1, y me va de maravilla, hasta me consume un 40% menos de memoria que la instalación limpia.
intentaré averiguar que pasa (no la uso), y reportaré si averiguo algo.
Al que está sentado en el trono, y al Cordero, sea la alabanza, la honra, la gloria
y el dominio por los siglos de los siglos.
Linux user #463168
Usuario
# 106278 El mismo problema
me a pasado lo mismo con la pc de mi hermano, lo estoy usando de conegillo de indias jejeje... antes de instalarlo en mi maquina, y eh notado que se congela de la nada, y ya se me congelo una vez simplemente dejandola prendida, no responde nada, ni siquiera puedo entrar alguna tty con ctrl + alt + f1....
auque cabe aclarar que no fue mi unico problema, ya que no podia siquiera entrar al entorno grafico, por suerte ya puede, y encontre que se debia a que kde ativaba por si solo los efectos de escritorio, aun cuando mi tarjeta no tenia aceleracion grafica (3D)... en fin... ese es otro tema....
Pero creo que se relaciona algo con este ya que creo que se deba a los drivers de video, ya que tambien tengo una laptop, donde tambien la instale y empece con el mismo problema de no poder entrar ni siquiera al escritorio... pero igual ya lo arregle
la pc de mi hermano utiliza el driver de video intel i810 and later, y la laptop usa el driver libre de la ati... ya que es muy vieja y no hay driver propetarios (o eso lei por este foro)...
la pc de mi hermano le instale mandriva free ademas que tambien fue en una instalacion limpia...
Usuario
# 106328 Tarjeta de video
Según me paso por experiencia propia, resulto ser el controlador de la tarjeta de video me paso en 2 equipos con tarjetas integradas de la marca Askrock chip Intel, de la nada se quedaban congeladas y no había forma de hacerlas funcionar a veces sin estar en uso solamente funcionando, otras veces estando dentro del Office como única solución tuve que cambiar de versión en esas 2 máquinas.
Usuario
# 106525 Nueva salida de "dmesg" sin errores, pero persisten los cuelgues
Definitivamente no tengo la más remota idea de cual puede ser la causa de los cuelgues aleatorios del sistema, y que aparecen un día sí y otro no... ayer por ejemplo, la máquina aguantó todo el día sin colgarse ni una sola vez, navegando con Firefox, con los efectos de KDE activados... ayer todo iba muy bien... y hoy de buenas a primeras se vuelve a colgar, hasta en 3 ocasiones...
En este momento parece estar aguantando y hace un momento he probado a ejecutar de nuevo el comando "dmesg" a ver si seguía tirando los errores raros en los que Annubis se fijó la otra vez, y, salvo que mi vista se los haya saltado, esta vez no he visto errores en la salida de "dmesg":
[varyheavy@localhost ~]$ dmesg
Linux version 2.6.33.5-desktop586-2mnb (herton@n2.mandriva.com) (gcc version 4.4.3 (GCC) ) #1 SMP Thu Jun 17 19:54:13 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable)
BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data)
BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
DMI 2.3 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x3ffc0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 00c00000
found SMP MP-table at [c00ff780] ff780
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 15000-1b000
RAMDISK: 37abb000 - 37fef379
Allocated new RAMDISK: 00771000 - 00ca5379
Move RAMDISK from 0000000037abb000 - 0000000037fef378 to 00771000 - 00ca5378
ACPI: RSDP 000fb5a0 00014 (v00 ACPIAM)
ACPI: RSDT 3ffc0000 00034 (v01 A M I OEMRSDT 08000511 MSFT 00000097)
ACPI: FACP 3ffc0200 00081 (v01 A M I OEMFACP 08000511 MSFT 00000097)
ACPI: DSDT 3ffc0400 047CB (v01 A0005 A0005092 00000092 INTL 02002026)
ACPI: FACS 3ffce000 00040
ACPI: APIC 3ffc0390 00070 (v01 A M I OEMAPIC 08000511 MSFT 00000097)
ACPI: OEMB 3ffce040 00060 (v01 A M I AMI_OEM 08000511 MSFT 00000097)
ACPI: MCFG 3ffc4bd0 0003C (v01 A M I OEMMCFG 08000511 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
139MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00017000 - 0001de80
(14 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000100000 - 000076cce4] TEXT DATA BSS ==> [0000100000 - 000076cce4]
#3 [000076d000 - 0000770240] BRK ==> [000076d000 - 0000770240]
#4 [00000ff790 - 0000100000] BIOS reserved ==> [00000ff790 - 0000100000]
#5 [00000ff780 - 00000ff790] MP-table mpf ==> [00000ff780 - 00000ff790]
#6 [000009fc00 - 00000f1710] BIOS reserved ==> [000009fc00 - 00000f1710]
#7 [00000f1850 - 00000ff780] BIOS reserved ==> [00000f1850 - 00000ff780]
#8 [00000f1710 - 00000f1850] MP-table mpc ==> [00000f1710 - 00000f1850]
#9 [0000010000 - 0000011000] TRAMPOLINE ==> [0000010000 - 0000011000]
#10 [0000011000 - 0000015000] ACPI WAKEUP ==> [0000011000 - 0000015000]
#11 [0000015000 - 0000017000] PGTABLE ==> [0000015000 - 0000017000]
#12 [0000771000 - 0000ca5379] NEW RAMDISK ==> [0000771000 - 0000ca5379]
#13 [0000017000 - 000001e000] BOOTMAP ==> [0000017000 - 000001e000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0003ffc0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0003ffc0
On node 0 totalpages: 261967
free_area_init_node: node 0, pgdat c0614400, node_mem_map c1001200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 280 pages used for memmap
HighMem zone: 35498 pages, LIFO batch:7
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 40000000:bfb80000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @c1c00000 s35416 r0 d21928 u2097152
pcpu-alloc: s35416 r0 d21928 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259919
Kernel command line: BOOT_IMAGE=linux root=LABEL=Mandriva resume=UUID=184fd3d6-5b00-48e7-af46-51d2ce21e11e splash=silent vga=788
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:0003ffc0)
Memory: 1026304k/1048320k available (3274k kernel code, 21080k reserved, 2041k data, 524k init, 143112k highmem)
virtual kernel memory layout:
fixmap : 0xffd54000 - 0xfffff000 (2732 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc0632000 - 0xc06b5000 ( 524 kB)
.data : 0xc0432bdb - 0xc0631348 (2041 kB)
.text : 0xc0100000 - 0xc0432bdb (3274 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 3065.915 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6131.83 BogoMIPS (lpj=3065915)
Security Framework initialized
TOMOYO Linux initialized
Mount-cache hash table entries: 512
CPU0: Hyper-Threading is disabled
mce: CPU supports 4 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: no PMU driver, software events only.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Checking initramfs for custom DSDT
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 15176 entries in 30 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) 4 CPU 3.06GHz stepping 01
Brought up 1 CPUs
Total of 1 processors activated (6131.83 BogoMIPS).
devtmpfs: initialized
Time: 22:27:12 Date: 08/09/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI Warning: Incorrect checksum in table [OEMB] - AB, should be A7 (20091214/tbutils-314)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x40010000-0xffffffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xccffc000-0xccffffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x9800-0x981f]
pci 0000:00:1d.1: reg 20: [io 0xa000-0xa01f]
pci 0000:00:1d.2: reg 20: [io 0xa400-0xa41f]
pci 0000:00:1d.3: reg 20: [io 0xa800-0xa81f]
pci 0000:00:1d.7: reg 10: [mem 0xccffbc00-0xccffbfff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0680-06ff
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10: [io 0x9400-0x9407]
pci 0000:00:1f.2: reg 14: [io 0x9000-0x9003]
pci 0000:00:1f.2: reg 18: [io 0x8800-0x8807]
pci 0000:00:1f.2: reg 1c: [io 0x8400-0x8403]
pci 0000:00:1f.2: reg 20: [io 0x8000-0x800f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
pci 0000:01:00.0: reg 10: [mem 0xce000000-0xceffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xcd000000-0xcdffffff 64bit]
pci 0000:01:00.0: reg 30: [mem 0xcfee0000-0xcfefffff pref]
pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xcd000000-0xcfefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:03:01.0: reg 10: [mem 0xcffff800-0xcfffffff]
pci 0000:03:01.0: reg 14: [io 0xe800-0xe87f]
pci 0000:03:01.0: supports D2
pci 0000:03:01.0: PME# supported from D2 D3hot D3cold
pci 0000:03:01.0: PME# disabled
pci 0000:03:02.0: reg 10: [io 0xe400-0xe4ff]
pci 0000:03:02.0: reg 14: [mem 0xcffff400-0xcffff4ff]
pci 0000:03:02.0: supports D1 D2
pci 0000:03:02.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:02.0: PME# disabled
pci 0000:03:04.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:03:04.0: reg 14: [mem 0xcffff000-0xcffff0ff]
pci 0000:03:04.0: reg 30: [mem 0xcffe0000-0xcffeffff pref]
pci 0000:03:04.0: supports D1 D2
pci 0000:03:04.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:04.0: PME# disabled
pci 0000:03:05.0: reg 10: [mem 0xcfffec00-0xcfffecff]
pci 0000:03:05.0: reg 14: [io 0xd800-0xd807]
pci 0000:03:05.0: reg 18: [io 0xd400-0xd4ff]
pci 0000:03:05.0: supports D2
pci 0000:03:05.0: PME# supported from D2 D3hot D3cold
pci 0000:03:05.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 03-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xd000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xcfffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Sólo se respeta a los que combaten, sólo vencen los que luchan, sólo triunfan los que resisten
Usuario
# 106526 vgaarb: device
vgaarb: device added:
PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 16 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
system 00:01: [mem 0xfed13000-0xfed19fff] has been reserved
system 00:07: [io 0x0680-0x06ff] has been reserved
system 00:08: [io 0x04d0-0x04d1] has been reserved
system 00:08: [io 0x0800-0x087f] has been reserved
system 00:08: [io 0x0480-0x04bf] has been reserved
system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0a: [mem 0xffc00000-0xfff7ffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0e: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0f: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0f: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0f: [mem 0x00100000-0x3fffffff] could not be reserved
pci 0000:00:1c.0: BAR 14: assigned [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x40200000-0x403fffff 64bit
pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:01.0: bridge window [mem 0xcd000000-0xcfefffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.0: bridge window [mem 0x40000000-0x401fffff]
pci 0000:00:1c.0: bridge window [mem 0x40200000-0x403fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03-03]
pci 0000:00:1e.0: bridge window [io 0xd000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xcff00000-0xcfffffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xcd000000-0xcfefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0x40000000-0x401fffff]
pci_bus 0000:02: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xcff00000-0xcfffffff]
pci_bus 0000:03: resource 3 [io 0x0000-0xffff]
pci_bus 0000:03: resource 4 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 16 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5328k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1281392832.390:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1736
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
vesafb: framebuffer at 0xd0000000, mapped to 0xf7c80000, using 1875k,
total 65536k
vesafb: mode is 800x600x16, linelength=1600, pages=2
vesafb: protected mode interface info at c000:d2b0
vesafb: pmi: set display start = c00cd2e6, set palette = c00cd350
vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce
3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
brd: module loaded
PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
PNP: PS/2 controller doesn't have KBD irq; using default 1
isapnp: Scanning for PnP cards...
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
PM: Checking image partition UUID=184fd3d6-5b00-48e7-af46-51d2ce21e11e
isapnp: No Plug & Play device found
psmouse serio1: ID: 10 00 64
input: ImPS/2 Generic Wheel Mouse as
/devices/platform/i8042/serio1/input/input0
PM: Resume from disk failed.
registered taskstats version 1
Magic number: 6:947:501
rtc_cmos 00:03: setting system clock to 2010-08-09 22:27:14 UTC
(1281392834)
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 524k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 16 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xccffbc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.33.5-desktop586-2mnb ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.33.5-desktop586-2mnb uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.33.5-desktop586-2mnb uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.33.5-desktop586-2mnb uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000a800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.33.5-desktop586-2mnb uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x9400 ctl 0x9000 bmdma 0x8000 irq 19
ata4: SATA max UDMA/133 cmd 0x8800 ctl 0x8400 bmdma 0x8008 irq 19
ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/100
ata3.00: 488397168 sectors, multi 16: LBA48
ata1.00: ATAPI: LITE-ON DVDRW SOHW-1633S, BPSA, max UDMA/66
ata1.01: ATAPI: ASUS DVD-E616P3H, 1.04, max UDMA/33
ata1.00: limited to UDMA/33 due to 40-wire cable
ata3.00: configured for UDMA/100
ata1.00: configured for UDMA/33
ata1.01: configured for UDMA/33
scsi 0:0:0:0: CD-ROM LITE-ON DVDRW SOHW-1633S BPSA PQ: 0
ANSI: 5
scsi 0:0:1:0: CD-ROM ASUS DVD-E616P3H 1.04 PQ: 0
ANSI: 5
scsi 2:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0
ANSI: 5
sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sda: sda1 sda2 sda3 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
usb 3-2: new low speed USB device using uhci_hcd and address 2
usb 3-2: New USB device found, idVendor=03f0, idProduct=0b0c
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB Receiver
usb 3-2: Manufacturer: Logitech
input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input1
generic-usb 0003:03F0:0B0C.0001: input,hidraw0: USB HID v1.10 Keyboard
[Logitech USB Receiver] on usb-0000:00:1d.1-2/input0
input: Logitech USB Receiver as
/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/input/input2
generic-usb 0003:03F0:0B0C.0002: input,hiddev0,hidraw1: USB HID v1.10
Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2/input1
PM: Marking nosave pages: 000000000009f000 - 0000000000100000
PM: Basic memory bitmaps created
PM: Basic memory bitmaps freed
EXT4-fs (sda5): INFO: recovery required on readonly filesystem
EXT4-fs (sda5): write access will be enabled during recovery
usb 5-1: new full speed USB device using uhci_hcd and address 2
usb 5-1: New USB device found, idVendor=058f, idProduct=9360
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 5-1: Product: USB Reader
usb 5-1: Manufacturer:
usb 5-1: SerialNumber: 2004888
EXT4-fs (sda5): orphan cleanup on readonly fs
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 6162225
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2359299
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2359297
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3538973
EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 3538955
EXT4-fs (sda5): 5 orphan inodes deleted
EXT4-fs (sda5): recovery complete
EXT4-fs (sda5): mounted filesystem with ordered data mode
Tomoyo security MAC extension available but disabled by default. If you
want to
enable and use it, ccs-tools package must be installed.
udev: starting version 153
input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
ppdev: user-space parallel port driver
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised:
dm-devel@redhat.com
loop: module loaded
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes:
PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.24 Thu Apr 22
09:18:20 PDT 2010
Floppy drive(s): fd0 is unknown type 12 (usb?)
fuse init (API version 7.13)
floppy0: no floppy controllers found
vboxguest: VirtualBox Guest PCI device not found.
Adding 1050800k swap on /dev/sda6. Priority:-1 extents:1
across:1050800k
i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ
19
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region
SMRG [0x400-0x40f]
ACPI: If an ACPI driver is available for this device, you should use it
instead of the native driver
Initializing USB Mass Storage driver...
scsi4 : usb-storage 5-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
sr 0:0:0:0: Attached scsi generic sg0 type 5
scsi 0:0:1:0: Attached scsi generic sg1 type 5
sd 2:0:0:0: Attached scsi generic sg2 type 0
8139too Fast Ethernet driver 0.9.28
8139too 0000:03:02.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
eth0: RealTek RTL8139 at 0xf7f38400, 00:13:d4:9c:9c:46, IRQ 21
8139too 0000:03:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
eth1: RealTek RTL8139 at 0xf7f3c000, 00:80:5a:62:72:c1, IRQ 16
sr1: scsi3-mmc drive: 0x/40x cd/rw xa/form2 cdda tray
sr 0:0:1:0: Attached scsi CD-ROM sr1
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
intel_rng: FWH not detected
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
ohci1394 0000:03:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[20]
MMIO=[cffff800-cfffffff] Max Packet=[2048] IR/IT contexts=[4/8]
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: irq 26 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d8000058fd62]
scsi 4:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0
ANSI: 0
sd 4:0:0:0: Attached scsi generic sg3 type 0
scsi 4:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0
ANSI: 0
sd 4:0:0:1: Attached scsi generic sg4 type 0
scsi 4:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0
ANSI: 0
sd 4:0:0:2: Attached scsi generic sg5 type 0
scsi 4:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0
ANSI: 0
sd 4:0:0:3: Attached scsi generic sg6 type 0
sd 4:0:0:0: [sdb] Attached SCSI removable disk
sd 4:0:0:1: [sdc] Attached SCSI removable disk
sd 4:0:0:2: [sdd] Attached SCSI removable disk
sd 4:0:0:3: [sde] Attached SCSI removable disk
ondemand governor failed, too long transition latency of HW, fallback to
performance governor
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
NET: Registered protocol family 17
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (16135 buckets, 64540 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option
or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ip_set version 4 loaded
ctnetlink v0.93: registering with nfnetlink.
ClusterIP Version 0.8 loaded successfully
xt_time: kernel timezone is +0200
u32 classifier
Actions configured
eth1: no IPv6 routers present
netfilter PSD loaded - (c) astaro AG
IFWLOG: register target
Lo dicho, no comprendo la razón de los cuelgues, ya que hasta hace
unos días, con la 2010 iba de puta madre y jamás tuve ningún cuelgue de
este tipo.
Sólo se respeta a los que combaten, sólo vencen los que luchan, sólo triunfan los que resisten
Usuario
# 106567 Cuelgues aleatorios....!
Saludos...!!
Navegando encontre un problema similar reportado en bugzillia de NOVEL... para la distribucion OPENSUSE 11.3.. Parece que es una cuestion de XORG y MESA.... por alla va el problema... aunque en el reporte solo hablan de arquitectura X86-64 y video INTEL... pero por aca veo que hay problemas con NVIDIA y arquitectura i586....
Las caracteristicas del congelamiento son iguales alas reportadas..
chequen esta liga...
https://bugzilla.novell.com/show_bug.cgi?id=615649
Yo uso NVIDIA driver propietario en KDE 4.4, en i586, Mandriva 2010.1 y hasta hoy ningun cuelgue ni nada.. (SUERTUDO que soy)
Usuario
# 106592 A mi me pasaba en Opensuse
me pasaba en opensuse con una intel, pero me parece que era el kernel xxxxx.34
en mandriva al principio me paso algo similar pero era porque habia instalado ese kernel, el experimental, despues me volví al kernel anterior y ahi funcionó, pero con una nvidia no me ha pasado. por lo menos con versiones actuales, de hecho en mi desktop tengo una y funciona bien
eso si no uso efectos gráficos. en versiones de mandriva anterior si se colgaba, pero se pasaba.
se quedaba congelado un rato y el disco empezaba a trabajar, me parece que era por la ram. bueno lo solucioné
le puse que swapeara mas, desactivé aplicaciones al inicio de gnome y le bajé el rendimiento a TRACKER(está en sus opciones)
adicionalmente le bajé las latencias a mis ram. quizá te ayude en algo. saludos.
KDE menos energia mas belleza :D