¿Como configuro WebCam A4Tech PK-835MJ? (Cerrado)

Hola José,

Se trata de una cámara USB. Copio lo que me pides:

yenta_socket : Texas Instruments|PCIxx21/x515 Cardbus Controller [BRIDGE_CARDBUS] (vendor:104c device:8031 subv:a400 subd:0000)
ssb : Broadcom Corporation|BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [NETWORK_OTHER] (vendor:14e4 device:4318 subv:103c subd:1356)
8139too : Realtek Semiconductor Co., Ltd.|RTL-8139/8139C/8139C+ [NETWORK_ETHERNET] (vendor:10ec device:8139 subv:103c subd:3091)
Card:ATI Radeon 9500 to Radeon X1050: ATI Technologies Inc|Radeon XPRESS 200M 5955 (PCIE) [DISPLAY_VGA] (vendor:1002 device:5955 subv:103c subd:3091)
amd64_agp : Advanced Micro Devices [AMD]|K8 [Athlon64/Opteron] Miscellaneous Control [BRIDGE_HOST] (vendor:1022 device:1103)
unknown : Advanced Micro Devices [AMD]|K8 [Athlon64/Opteron] DRAM Controller [BRIDGE_HOST] (vendor:1022 device:1102)
unknown : Advanced Micro Devices [AMD]|K8 [Athlon64/Opteron] Address Map [BRIDGE_HOST] (vendor:1022 device:1101)
unknown : Advanced Micro Devices [AMD]|K8 [Athlon64/Opteron] HyperTransport Technology Configuration [BRIDGE_HOST] (vendor:1022 device:1100)
snd_atiixp_modem: ATI Technologies Inc|SB400 AC'97 Modem Controller [COMMUNICATION_MODEM] (vendor:1002 device:4378 subv:103c subd:3091)
snd_atiixp : ATI Technologies Inc|IXP SB400 AC'97 Audio Controller [MULTIMEDIA_AUDIO] (vendor:1002 device:4370 subv:103c subd:3091)
unknown : ATI Technologies Inc|IXP SB400 PCI-PCI Bridge [BRIDGE_PCI] (vendor:1002 device:4371)
unknown : ATI Technologies Inc|IXP SB400 PCI-ISA Bridge [BRIDGE_ISA] (vendor:1002 device:4377 subv:103c subd:3091)
pata_atiixp : ATI Technologies Inc|IXP SB400 IDE Controller [STORAGE_IDE] (vendor:1002 device:4376 subv:103c subd:3091)
i2c_piix4 : ATI Technologies Inc|IXP SB400 SMBus Controller [SERIAL_SMBUS] (vendor:1002 device:4372 subv:103c subd:3091)
ehci_hcd : ATI Technologies Inc|IXP SB400 USB2 Host Controller [SERIAL_USB] (vendor:1002 device:4373 subv:103c subd:3091)
ohci_hcd : ATI Technologies Inc|IXP SB400 USB Host Controller [SERIAL_USB] (vendor:1002 device:4375 subv:103c subd:3091)
ohci_hcd : ATI Technologies Inc|IXP SB400 USB Host Controller [SERIAL_USB] (vendor:1002 device:4374 subv:103c subd:3091)
shpchp : ATI Technologies Inc|RS480 PCI Bridge [BRIDGE_PCI] (vendor:1002 device:5a3f)
ati_agp : ATI Technologies Inc|RS480 Host Bridge [BRIDGE_HOST] (vendor:1002 device:5950 subv:103c subd:3091)
hub : Linux 2.6.27-desktop586-0.rc8.2mnb ohci_hcd|OHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0001)
zc0301 : Vimicro Corp.|PC Camera (vendor:0ac8 device:303b)
hub : Linux 2.6.27-desktop586-0.rc8.2mnb ohci_hcd|OHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0001)
usbhid : Unknown| USB OPTICAL MOUSE [Human Interface Device|Boot Interface Subclass|Mouse] (vendor:15d9 device:0a4c)
hub : Linux 2.6.27-desktop586-0.rc8.2mnb ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002)

Saludos

Gabriela

Hoy no he tenido tiempo de ver el asunto de mi camarita, pero en el transcurso de la noche lo haré sin falta.

Saludos

Gabriela

Este es el resultado del dmesg después de conectar mi cámara:

Linux version 2.6.27-desktop586-0.rc8.2mnb (pterjan@klodia.mandriva.com) (gcc version 4.3.1 20080626 (prerelease) (GCC) ) #1 SMP Thu Oct 2 05:52:21 EDT 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000017ef0000 (usable)
BIOS-e820: 0000000017ef0000 - 0000000017eff000 (ACPI data)
BIOS-e820: 0000000017eff000 - 0000000017f00000 (ACPI NVS)
BIOS-e820: 0000000017f00000 - 0000000020000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
last_pfn = 0x17ef0 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
kernel direct mapping tables up to 17ef0000 @ 7000-d000
RAMDISK: 03c89000 - 03fff6e6
DMI present.
ACPI: RSDP 000F8290, 0014 (r0 HP )
ACPI: RSDT 17EF8BE5, 0034 (r1 HP 3097 20040804 LTP 0)
ACPI: FACP 17EFEE20, 0074 (r1 HP 3097 20040804 PTL 5F)
ACPI: DSDT 17EF8C19, 6207 (r1 HP 3091 20040804 MSFT 100000E)
ACPI: FACS 17EFFFC0, 0040
ACPI: SSDT 17EFEE94, 00D6 (r1 PTLTD POWERNOW 20040804 LTP 1)
ACPI: APIC 17EFEF6A, 005A (r1 PTLTD 3097 20040804 LTP 0)
ACPI: MCFG 17EFEFC4, 003C (r1 PTLTD MCFG 20040804 LTP 0)
ACPI: DMI detected: Hewlett-Packard
0MB HIGHMEM available.
382MB LOWMEM available.
mapped low ram: 0 - 17ef0000
low ram: 00000000 - 17ef0000
bootmap 00002000 - 00004fe0
(9 early reservations) ==> bootmem [0000000000 - 0017ef0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000592800] TEXT DATA BSS ==> [0000100000 - 0000592800]
#4 [0003c89000 - 0003fff6e6] RAMDISK ==> [0003c89000 - 0003fff6e6]
#5 [0000593000 - 0000596000] INIT_PG_TABLE ==> [0000593000 - 0000596000]
#6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
#8 [0000002000 - 0000005000] BOOTMAP ==> [0000002000 - 0000005000]
found SMP MP-table at [c00f8340] 000f8340
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00017ef0
HighMem 0x00017ef0 -> 0x00017ef0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00017ef0
On node 0 totalpages: 97935
free_area_init_node: node 0, pgdat c049d000, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 93202 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x8008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000)
PERCPU: Allocating 40988 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97169
Kernel command line: BOOT_IMAGE=linux root=UUID=8776c6d6-e5d6-11dd-ac2c-7f94cd3a7f65 resume=UUID=91878124-e5d6-11dd-a8a9-f5252c8e92c3 splash=silent
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 1790.806 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 379772k/392128k available (2585k kernel code, 11804k reserved, 1205k data, 364k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffe17000 - 0xfffff000 (1952 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
lowmem : 0xc0000000 - 0xd7ef0000 ( 382 MB)
.init : 0xc04ba000 - 0xc0515000 ( 364 kB)
.data : 0xc0386496 - 0xc04b3a00 (1205 kB)
.text : 0xc0100000 - 0xc0386496 (2585 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 3581.61 BogoMIPS (lpj=1790806)
Security Framework initialized
AppArmor: AppArmor disabled by boottime parameter
Mount-cache hash table entries: 512
Hook version: 2.6.27-2.3 2008/08/29
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Early unpacking initramfs... done
Freeing initrd memory: 3545k freed
ACPI: Core revision 20080609
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...
..... (found apic 0 pin 2) ...
....... works.
CPU0: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 02
APIC calibration not consistent with PM Timer: 49ms instead of 100ms
APIC delta adjusted to PM-Timer: 1243639 (621705)
Brought up 1 CPUs
Total of 1 processors activated (3581.61 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0 level CPU
groups: 0
net_namespace: 840 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 2.10 entry at 0xfd8bc, last bus=5
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 4
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:13.0 reg 10 32bit mmio: [c0000000, c0000fff]
PCI: 0000:00:13.1 reg 10 32bit mmio: [c0001000, c0001fff]
PCI: 0000:00:13.2 reg 10 32bit mmio: [c0002000, c0002fff]
pci 0000:00:13.2: supports D1
pci 0000:00:13.2: supports D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: PME# disabled
PCI: 0000:00:14.0 reg 10 io port: [8400, 840f]
PCI: 0000:00:14.0 reg 14 32bit mmio: [c0003000, c00033ff]
HPET not enabled in BIOS. You might try hpet=force boot option
PCI: 0000:00:14.1 reg 10 io port: [1f0, 1f7]
PCI: 0000:00:14.1 reg 14 io port: [3f4, 3f7]
PCI: 0000:00:14.1 reg 18 io port: [170, 177]
PCI: 0000:00:14.1 reg 1c io port: [374, 377]
PCI: 0000:00:14.1 reg 20 io port: [8410, 841f]
PCI: 0000:00:14.5 reg 10 32bit mmio: [c0003400, c00034ff]
PCI: 0000:00:14.6 reg 10 32bit mmio: [c0003800, c00038ff]
PCI: 0000:01:05.0 reg 10 32bit mmio: [c8000000, cfffffff]
PCI: 0000:01:05.0 reg 14 io port: [9000, 90ff]
PCI: 0000:01:05.0 reg 18 32bit mmio: [c0100000, c010ffff]
PCI: 0000:01:05.0 reg 30 32bit mmio: [0, 1ffff]
pci 0000:01:05.0: supports D1
pci 0000:01:05.0: supports D2
PCI: bridge 0000:00:01.0 io port: [9000, 9fff]
PCI: bridge 0000:00:01.0 32bit mmio: [c0100000, c01fffff]
PCI: bridge 0000:00:01.0 64bit mmio pref: [c8000000, cfffffff]
PCI: 0000:05:00.0 reg 10 io port: [a000, a0ff]
PCI: 0000:05:00.0 reg 14 32bit mmio: [c0208000, c02080ff]
pci 0000:05:00.0: supports D1
pci 0000:05:00.0: supports D2
pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:05:00.0: PME# disabled
PCI: 0000:05:02.0 reg 10 32bit mmio: [c0204000, c0205fff]
PCI: 0000:05:09.0 reg 10 32bit mmio: [0, fff]
pci 0000:05:09.0: supports D1
pci 0000:05:09.0: supports D2
pci 0000:05:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:05:09.0: PME# disabled
pci 0000:00:14.4: transparent bridge
PCI: bridge 0000:00:14.4 io port: [a000, afff]
PCI: bridge 0000:00:14.4 32bit mmio: [c0200000, c02fffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:09: mem resource (0x0-0xfff) overlaps 0000:01:05.0 BAR 6 (0x0-0x1ffff), disabling
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: RTC can wake from S4
system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:08: ioport range 0x1080-0x1080 has been reserved
system 00:08: ioport range 0x220-0x22f has been reserved
system 00:08: ioport range 0x40b-0x40b has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x4d6-0x4d6 has been reserved
system 00:08: ioport range 0x530-0x537 has been reserved
system 00:08: ioport range 0xc00-0xc01 has been reserved
system 00:08: ioport range 0xc14-0xc14 has been reserved
system 00:08: ioport range 0xc50-0xc52 has been reserved
system 00:08: ioport range 0xc6c-0xc6c has been reserved
system 00:08: ioport range 0xc6f-0xc6f has been reserved
system 00:08: ioport range 0xcd4-0xcd5 has been reserved
system 00:08: ioport range 0xcd6-0xcd7 has been reserved
system 00:08: ioport range 0xcd8-0xcdf has been reserved
system 00:08: ioport range 0x8000-0x805f has been reserved
system 00:08: ioport range 0xf40-0xf47 has been reserved
system 00:08: ioport range 0x87f-0x87f has been reserved
system 00:09: iomem range 0xe0000-0xfffff could not be reserved
system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x9000-0x9fff
pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
pci 0000:00:01.0: PREFETCH window: 0x000000c8000000-0x000000cfffffff
pci 0000:05:09.0: CardBus bridge, secondary bus 0000:06
pci 0000:05:09.0: IO window: 0x00a400-0x00a4ff
pci 0000:05:09.0: IO window: 0x00a800-0x00a8ff
pci 0000:05:09.0: PREFETCH window: 0x30000000-0x33ffffff
pci 0000:05:09.0: MEM window: 0x34000000-0x37ffffff
pci 0000:00:14.4: PCI bridge, secondary bus 0000:05
pci 0000:00:14.4: IO window: 0xa000-0xafff
pci 0000:00:14.4: MEM window: 0xc0200000-0xc02fffff
pci 0000:00:14.4: PREFETCH window: 0x00000030000000-0x00000033ffffff
pci 0000:05:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:05:09.0: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffffffffffff]
bus: 01 index 0 io port: [9000, 9fff]
bus: 01 index 1 mmio: [c0100000, c01fffff]
bus: 01 index 2 mmio: [c8000000, cfffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 05 index 0 io port: [a000, afff]
bus: 05 index 1 mmio: [c0200000, c02fffff]
bus: 05 index 2 mmio: [30000000, 33ffffff]
bus: 05 index 3 io port: [0, ffff]
bus: 05 index 4 mmio: [0, ffffffffffffffff]
bus: 06 index 0 io port: [a400, a4ff]
bus: 06 index 1 io port: [a800, a8ff]
bus: 06 index 2 mmio: [30000000, 33ffffff]
bus: 06 index 3 mmio: [34000000, 37ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
apm: BIOS not found.
audit: initializing netlink socket (disabled)
type=2000 audit(1232586615.249:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 749
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: MSI quirk detected; MSI disabled
pci 0000:01:05.0: Boot video device
vesafb: framebuffer at 0xc8000000, mapped to 0xd8880000, using 1875k, total 131072k
vesafb: mode is 800x600x16, linelength=1600, pages=135
vesafb: protected mode interface info at c000:53b7
vesafb: pmi: set display start = c00c5425, set palette = c00c545f
vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
serial 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
serial 0000:00:14.6: PCI INT B disabled
brd: module loaded
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI No-Shortcut mode
registered taskstats version 1
BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
Freeing unused kernel memory: 364k freed
input: AT Translated Set 2 keyboard as /class/input/input0
Switched to high resolution mode on CPU 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd 0000:00:13.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0002000
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.27-desktop586-0.rc8.2mnb ehci_hcd
usb usb1: SerialNumber: 0000:00:13.2
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:13.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.27-desktop586-0.rc8.2mnb ohci_hcd
usb usb2: SerialNumber: 0000:00:13.0
ohci_hcd 0000:00:13.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0001000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.27-desktop586-0.rc8.2mnb ohci_hcd
usb usb3: SerialNumber: 0000:00:13.1
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
No dock devices found.
libata version 3.00 loaded.
pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pata_atiixp 0000:00:14.1: setting latency timer to 64
scsi0 : pata_atiixp
scsi1 : pata_atiixp
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8410 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8418 irq 15
ata1.00: ATA-6: ST960821A, 3.02, max UDMA/100
ata1.00: 117210240 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata2.00: ATAPI: PIONEER DVDRW DVR-K15, 1.11, max MWDMA2
ata2.00: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA ST960821A 3.02 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>input: ImPS/2 Generic Wheel Mouse as /class/input/input1
sda1 sda2 < sda5 sda6 >
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM PIONEER DVDRW DVR-K15 1.11 PQ: 0 ANSI: 5
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
TomoyoLinux Mandatory Access Control disabled by default.
You need to install ccs-tools if you want to enable it.
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 1:0:0:0: Attached scsi generic sg1 type 5
Driver 'sr' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
Linux agpgart interface v0.103
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8400, revision 0
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [LID]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
ACPI: WMI: Mapper loaded
8139too Fast Ethernet driver 0.9.28
8139too 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
eth0: RealTek RTL8139 at 0xd8a96000, 00:c0:9f:e6:9f:c6, IRQ 18
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Yenta: CardBus bridge found at 0000:05:09.0 [103c:3091]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:05:09.0, mfunc 0x01a01b22, devctl 0x66
ACPI: AC Adapter [ACAD] (off-line)
Yenta: ISA IRQ mask 0x0ee8, PCI irq 17
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09
pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
cs: IO port probe 0xa000-0xafff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
ACPI: Battery Slot [BAT1] (battery present)
input: Video Bus as /class/input/input6
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
b43-pci-bridge 0000:05:02.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ssb: Sonics Silicon Backplane found on PCI device 0000:05:02.0
ATI IXP AC97 controller 0000:00:14.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
ATI IXP MC97 controller 0000:00:14.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
MC'97 0 converters and GPIO not ready (0x1)
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
Marking TSC unstable due to TSC halts in idle
b43-phy0: Broadcom 4318 WLAN found
b43-phy0 debug: Found PHY: Analog 3, Type 2, Revision 7
b43-phy0 debug: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
phy0: Selected rate control algorithm 'pid'
Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
Non-volatile memory driver v1.2
powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (1 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xa
powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xc
powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x13
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
loop: module loaded
Adding 1293192k swap on /dev/sda5. Priority:-1 extents:1 across:1293192k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Clocksource tsc unstable (delta = -186684457 ns)
eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
PPP generic driver version 2.4.2
NET: Registered protocol family 17
[drm] Initialized drm 1.1.0 20060810
pci 0000:01:05.0: power state changed by ACPI to D0
pci 0000:01:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[drm] Initialized radeon 1.29.0 20080528 on minor 0
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] Num pipes: 1
[drm] writeback test succeeded in 1 usecs
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
fuse init (API version 7.9)
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
usb 2-1: New USB device found, idVendor=15d9, idProduct=0a4c
usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1: Product: USB OPTICAL MOUSE
usbcore: registered new interface driver hiddev
input: USB OPTICAL MOUSE as /class/input/input7
input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:13.0-1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
input: b43-phy0 as /class/input/input8
firmware: requesting b43/ucode5.fw
b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
b43-phy0 ERROR: You must go to http://linuxwireless.org/en/users/Drivers/b43#devicefirmware and download the latest firmware (version 4).
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
eth0: no IPv6 routers present
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
eth0: no IPv6 routers present
usb 1-2: new high speed USB device using ehci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
usb 1-2: New USB device found, idVendor=0bda, idProduct=0116
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: USB2.0-CRW
usb 1-2: Manufacturer: Generic
usb 1-2: SerialNumber: 20021111153705700
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver ub
scsi 2:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: [sdb] 31360 512-byte hardware sectors (16 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] 31360 512-byte hardware sectors (16 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI removable disk
sd 2:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
aria2c[5854]: segfault at 58 ip 0815406f sp bfcf2f98 error 4 in aria2c[8048000+234000]
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
usb 1-2: USB disconnect, address 3
usb 3-1: new full speed USB device using ohci_hcd and address 2
usb 3-1: configuration #1 chosen from 1 choice
usb 3-1: New USB device found, idVendor=0ac8, idProduct=303b
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: PC Camera
usb 3-1: Manufacturer: Vimicro Corp.
Linux video capture interface: v2.00
zc0301: V4L2 driver for ZC0301[P] Image Processor and Control Chip v1:1.10
usb 3-1: ZC0301[P] Image Processor and Control Chip detected (vid/pid 0x0AC8:0x303B)
usb 3-1: No supported image sensor detected
usbcore: registered new interface driver zc0301

Saludos

Gabriela