Lector de Feeds

← Older revision Revision as of 22:26, 1 February 2026 Line 64: Line 64:  * Abfrage zur Zeitzone des Anwenders, beim Starten der Installation * Abfrage zur Zeitzone des Anwenders, beim Starten der Installation  Dies erlaubt uns die richtige Zeit für die Systemuhr einzustellen. Dies erlaubt uns die richtige Zeit für die Systemuhr einzustellen. −Dies ist nötig um zu verhindern, dass die Verifizierung der rpm Pakete fehlschlägt, wenn diese sehr früh von einer Netzwerkquelle geladen werden. Diese Eigenschaft wird mit der nächsten Runde der ISOs verfügbar sein. Falls Sie Funktion testen möchten können Sie die Netzwerkinstallation-ISOs verwenden und eine HTTP Quellen für Stage 2 auswählen.+Dies ist nötig um zu verhindern, dass die Verifizierung der rpm Pakete fehlschlägt, wenn diese sehr früh von einer Netzwerkquelle geladen werden. Das neue Sequoia PGP Backend lehnt Pakete ab, welche den Anschein haben, dass diese in der Zukunft signiert wurden. −Das neue Sequoia PGP Backend lehnt Pakete ab, welche den Anschein haben, dass diese in der Zukunft signiert wurden.+Diese Eigenschaft wird mit der nächsten Runde der ISOs verfügbar sein. Falls Sie Funktion testen möchten können Sie die Netzwerkinstallation-ISOs verwenden und eine HTTP Quellen für Stage 2 auswählen.  +   * Viele Fehlerbehebungen * Viele Fehlerbehebungen  * Unterstützung für Drahtlosnetwerke. Diese Eigenschaft wird mit der nächsten Veröffentlichung der ISOs verfügbar sein. Geben Sie uns Bescheid, ob es bei Ihnen funktioniert. * Unterstützung für Drahtlosnetwerke. Diese Eigenschaft wird mit der nächsten Veröffentlichung der ISOs verfügbar sein. Geben Sie uns Bescheid, ob es bei Ihnen funktioniert. Line 101: Line 102:  DNF (Dandified Yum) wurde als Alternative zu urpmi in Mageia 6 eingeführt. DNF (Dandified Yum) wurde als Alternative zu urpmi in Mageia 6 eingeführt.    −DNF ist die nächste Generation der Abhängigkeitenauflösung und High-Level-Paketverwaltung welches von zwei Projekten abstammt: Fedoras YUM (Yellowdog Updater, Modified) und openSUSE's SAT Solver (libsolv). DNF wurde vor einigen Jahren von YUM geforkt um es umzuschreiben, damit es die SAT Solver Bibliothek von openSUSE verwendet und eine starke Umstrukturierung der Codebasis, damit die API sowohl für eine Erweiterung von DNF (über Plug-Ins und Hooks) und erstellen von Anwendungen darauf- (wie grafische Frontends und Frameworks zur Automatisierung des Systemlebenszyklus).+DNF ist die nächste Generation zur Auflösung von Abhängigkeiten und eine High-Level-Paketverwaltung welches von zwei Projekten abstammt: Fedoras YUM (Yellowdog Updater, Modified) und openSUSE's SAT Solver (libsolv). DNF wurde vor einigen Jahren von YUM geforkt um es umzuschreiben, damit es die SAT Solver Bibliothek von openSUSE verwendet und eine starke Umstrukturierung der Codebasis, damit die API sowohl für eine Erweiterung von DNF (über Plug-Ins und Hooks) und erstellen von Anwendungen darauf- (wie grafische Frontends und Frameworks zur Automatisierung des Systemlebenszyklus).     DNF erscheint mit erweiterter Berichterstattung bei Problemen, erweiterte Verfolgung von schwachen Abhängigkeiten, Unterstützung für größere Abhängigkeiten (siehe hierzu die RPM Veröffentlichungshinweise für weitere Informationen)  und ausführlichere Übertragungsinformationen während den Vorgängen. DNF erscheint mit erweiterter Berichterstattung bei Problemen, erweiterte Verfolgung von schwachen Abhängigkeiten, Unterstützung für größere Abhängigkeiten (siehe hierzu die RPM Veröffentlichungshinweise für weitere Informationen)  und ausführlichere Übertragungsinformationen während den Vorgängen. Line 132: Line 133:     ==== Mageia Kontrollzentrum ==== ==== Mageia Kontrollzentrum ==== −Unser Soundmanager, draksound, im [https://doc.mageia.org/mcc/10/de/content/index.html Mageia Kontrollzentrum (MCC)] wurde erweitert um einfach zwischen PulseAudio und [[#Soundserver|PipeWire]] wechseln zu können.+Seit Mageia 9 ist draksound unsere Soundverwaltung im [https://doc.mageia.org/mcc/10/de/content/index.html Mageia Kontrollzentrum (MCC)] wurde erweitert um einfach zwischen PulseAudio und [[#Soundserver|PipeWire]] wechseln zu können.     ==== Weiteres ==== ==== Weiteres ==== Line 159: Line 160:     ===== Entfernen alter Kernel ===== ===== Entfernen alter Kernel ===== −Es gibt ein neues Werkzeug um alte Kernel aus dem System zu entfernen, {{cmd-de|remove-old-kernels}}. Es arbeitet im Hintergrund, ohne dass man hiervon selbst Kenntnis erhält und behält die drei zuletzt installierten Kernel. Dies behebt ein Problem, welches dazu führen kann, dass das System nur begrenzten Speicherplatz auf der root Partition zur Verfügung hat, nachdem mehrere Aktualisierungen des Kernels durchgeführt wurden. Neben dem automatischen Modus, welcher wöchentlich durchgeführt wird, kann es eingerichtet werden, dass es manuell über die Befehlszeile ausgeführt wird. Mit der Option -h wird Ihnen die Hilfe angezeigt. {{cmd-de|remove-old-kernels}} kann auch vom Mageia Hauptmenü aus, unter {{menu-de|Werkzeuge -> Systemwerkzeuge}} ausgeführt werden. Es ist auch eine man-page verfügbar, welches weitere Einzelheiten für fortgeschrittene Anwender bereithält.+Das Werkzeug um alte Kernel aus dem System zu entfernen, {{cmd-de|remove-old-kernels}}. Es arbeitet im Hintergrund, ohne dass man hiervon selbst Kenntnis erhält und behält die drei zuletzt installierten Kernel. Dies behebt ein Problem, welches dazu führen kann, dass das System nur begrenzten Speicherplatz auf der root Partition zur Verfügung hat, nachdem mehrere Aktualisierungen des Kernels durchgeführt wurden. Neben dem automatischen Modus, welcher wöchentlich durchgeführt wird, kann es eingerichtet werden, dass es manuell über die Befehlszeile ausgeführt wird. Mit der Option -h wird Ihnen die Hilfe angezeigt. {{cmd-de|remove-old-kernels}} kann auch vom Mageia Hauptmenü aus, unter {{menu-de|Werkzeuge -> Systemwerkzeuge}} ausgeführt werden. Es ist auch eine man-page verfügbar, welches weitere Einzelheiten für fortgeschrittene Anwender bereithält.     {{note-de|Falls Sie von Mageia 9 aus upgraden wird dieses Werkzeug nicht als Teil des Upgradeprozesses installiert.<br> {{note-de|Falls Sie von Mageia 9 aus upgraden wird dieses Werkzeug nicht als Teil des Upgradeprozesses installiert.<br> Line 174: Line 175:     ==== dhcpcd ersetzt dhcp-cleint ==== ==== dhcpcd ersetzt dhcp-cleint ==== −{{prog|dhcpcd}} ersetzt das veraltete {{prog|dhcp-client}} während der Aktualisierung - dies geschieht automatisch.+{{prog|dhcpcd}} ersetzt das veraltete {{prog|dhcp-client}}.  Unser Werkzeug zur Konfiguration des Netzwerks wurde darauf angepasst {prog|dhcpcd}} anstelle von {{prog|dhcp-client}} zu verwenden. Unser Werkzeug zur Konfiguration des Netzwerks wurde darauf angepasst {prog|dhcpcd}} anstelle von {{prog|dhcp-client}} zu verwenden.    Psyca

‎Gestión de paquetes: typo

Show changes Katnatek

‎dhcpcd replace dhcp-client: Automatic switch was disabled

← Older revision Revision as of 18:27, 1 February 2026 (2 intermediate revisions by the same user not shown)Line 150: Line 150:     ==== Mageia Control Center ==== ==== Mageia Control Center ==== −Our sound manager, draksound, in [https://doc.mageia.org/mcc/10/en/content/index.html MCC] have been enhanced to easily switch between PulseAudio and [[#Sound_servers|PipeWire]].+Since Mageia 9, our sound manager, draksound, in [https://doc.mageia.org/mcc/10/en/content/index.html MCC] have been enhanced to easily switch between PulseAudio and [[#Sound_servers|PipeWire]].     ==== Other ==== ==== Other ==== Line 184: Line 184:  ===== remove-old-kernels ===== ===== remove-old-kernels =====    −This is a new tool which removes old kernels from systems. It works in the background without any user intervention and defaults to keeping the three most recently installed kernels. This resolves an issue which could cause systems with limited storage to run out of root partition space after many kernel updates. As well as the default automatic mode which is run weekly it may be configured and run manually from the command line. Run with -h option to see help. It is also available to be run from the Mageia main menu where it may be found under {{menu|Tools -> System tools}}. There is also a man page which covers more detail for expert users.+The tool which removes old kernels from systems. It works in the background without any user intervention and defaults to keeping the three most recently installed kernels. This resolves an issue which could cause systems with limited storage to run out of root partition space after many kernel updates. As well as the default automatic mode which is run weekly it may be configured and run manually from the command line. Run with -h option to see help. It is also available to be run from the Mageia main menu where it may be found under {{menu|Tools -> System tools}}. There is also a man page which covers more detail for expert users.     {{note|If you upgrade from Mageia 9 the tool is not installed as part of the upgrade process.<br> {{note|If you upgrade from Mageia 9 the tool is not installed as part of the upgrade process.<br> Line 201: Line 201:  ==== dhcpcd replace dhcp-client ==== ==== dhcpcd replace dhcp-client ====    −{{prog|dhcpcd}} replaces the obsolete {{prog|dhcp-client}}, in the upgrade process the change will be done automatically.+{{prog|dhcpcd}} replaces the obsolete {{prog|dhcp-client}}.  Our network configuration tools have been adapted to use {{prog|dhcpcd}} in replace of {{prog|dhcp-client}} Our network configuration tools have been adapted to use {{prog|dhcpcd}} in replace of {{prog|dhcp-client}}    Katnatek

← Older revision Revision as of 17:18, 1 February 2026 (One intermediate revision by the same user not shown)Line 4: Line 4:  {{multi language banner-es|[[Mageia 10 Errata-de|Deutsch]] ; [[Mageia 10 Errata|English]] ; [[Erratas de Mageia 10-es|Español]]}} {{multi language banner-es|[[Mageia 10 Errata-de|Deutsch]] ; [[Mageia 10 Errata|English]] ; [[Erratas de Mageia 10-es|Español]]}}    −== Notes ==+{{draft-es}}  +   +== Notas ==     This page is a companion to [[Mageia_10_Release_Notes|the Release Notes]]. This page is a companion to [[Mageia_10_Release_Notes|the Release Notes]]. Line 24: Line 26:  <br> <br>    −== Boot ==+== Arranque ==     Also see [[#Graphics|Graphics]]. Also see [[#Graphics|Graphics]].     <br> <br> −== Live images ==+== Imagenes Live ==     <br> <br> Line 43: Line 45:     <br> <br> −=== Non-working WiFi cards ===+=== Tarjetas gráficas que no funcionan ===     === Live Xfce === === Live Xfce === Line 50: Line 52:     <br> <br> −=== Live installer ===+=== Instalador Live ===     {{bug|33135}} '''If using an updated Live''' system (using persistence or it is updated while running) and there is no internet connection during install but updates to grub2 or dependencies exists, installer will fail the last step of install as it fail retrieving the needed packages.  '''WORKAROUND''' is to '''disable the online repositories - before starting the installer.'''  Note that the internal default Live repositories need to be enabled.  For more information see [[Install_to_removable_device#Using_the_Live_installer|notes on Live installer]]. {{bug|33135}} '''If using an updated Live''' system (using persistence or it is updated while running) and there is no internet connection during install but updates to grub2 or dependencies exists, installer will fail the last step of install as it fail retrieving the needed packages.  '''WORKAROUND''' is to '''disable the online repositories - before starting the installer.'''  Note that the internal default Live repositories need to be enabled.  For more information see [[Install_to_removable_device#Using_the_Live_installer|notes on Live installer]].    −==== Retaining a third party bootloader ====+==== Mantener un cargador de arranque de terceros ====     If, during Live install, you want to retain your existing third party bootloader, then, when you get the bootloader screen, proceed to the NEXT screen titled 'Mageia Live' where there is an 'Advanced' button below the 'Probe Foreign OS' option. If, during Live install, you want to retain your existing third party bootloader, then, when you get the bootloader screen, proceed to the NEXT screen titled 'Mageia Live' where there is an 'Advanced' button below the 'Probe Foreign OS' option. Line 63: Line 65:  <br> <br>    −== Installer images ==+== Imágenes de instalación Clasica ==        <br> <br> −=== Intel Rapid Storage Technology, RST incompatibility ===  +=== Incompatibilidad con Intel Rapid Storage Technology, RST ===       If your device is using [https://en.wikipedia.org/wiki/Intel_Rapid_Storage_Technology RST (Intel Rapid Storage Technology)] (default for many new devices), you must read [[Install_on_device_using_RST|Install on device using RST]]. If your device is using [https://en.wikipedia.org/wiki/Intel_Rapid_Storage_Technology RST (Intel Rapid Storage Technology)] (default for many new devices), you must read [[Install_on_device_using_RST|Install on device using RST]]. Line 73: Line 75:     <br> <br> −=== Sound ===+=== Audio ===     <br> <br> Katnatek

Created for translation

New page

[[Category:Erratas]]
[[Category:Mageia 10]]

{{multi language banner-es|[[Mageia 10 Errata-de|Deutsch]] ; [[Mageia 10 Errata|English]] ; [[Erratas de Mageia 10-es|Español]]}}

== Notes ==

This page is a companion to [[Mageia_10_Release_Notes|the Release Notes]].

''' '' Entries below prepended with ''"FIXED"'', have a released update.''' '' So if you experience a problem marked fixed, try to do a full update. Some issues may need logout/login or reboot. Some are installation or upgrade issues. Note it may take a day for a released update to [http://mirrors.mageia.org/status reach your mirror].

Significant issues with packages contained in the ISOs are listed here, plus wider coverage related to upgrading. - We have a lot of additional software in repositories.

A non-listed issue you experience may be fixed if you do a full update.

Also see Release Notes [[Mageia_10_Release_Notes#Known_issues|Known issues]] and [[Mageia_10_Release_Notes#Bug_reporting|Bug reporting]] sections.

''THIS PAGE IS A WORK IN PROGRESS''

'' Note that we will be updating issues from the [https://bugs.mageia.org/buglist.cgi?f0=OP&f1=OP&f2=flagtypes.name&f3=CP&f4=CP&j1=OR&list_id=193493&o2=substring&order=Importance&query_format=advanced&resolution=---&resolution=FIXED&resolution=WORKSFORME&v2=n_release_notes10 FOR_RELEASENOTES10], [https://bugs.mageia.org/buglist.cgi?f0=OP&f1=OP&f2=flagtypes.name&f3=CP&f4=CP&j1=OR&list_id=193453&o2=equals&order=Importance&query_format=advanced&resolution=---&resolution=FIXED&resolution=INVALID&resolution=WONTFIX&resolution=WORKSFORME&resolution=MOVED&resolution=OLD&v2=in_errata10%3F INCLUDE IN ERRATAS10?], [https://bugs.mageia.org/buglist.cgi?f0=OP&f1=OP&f2=flagtypes.name&f3=CP&f4=CP&j1=OR&list_id=193455&o2=equals&order=Importance&query_format=advanced&resolution=---&resolution=FIXED&resolution=INVALID&resolution=WONTFIX&resolution=WORKSFORME&resolution=MOVED&resolution=OLD&v2=in_errata10%2B INCLUDED IN ERRATAS10], as they are decided. We try to keep it rather relaxed, but notorious even so, and each issue must be short and effectively described to not make the whole page too big. So, to-the-point descriptions of symptom and possible remedy. Sometime a link directly to a bug comment where a good workaround is described, or other resource that may help.''

This English version errata is the master, German version usually kept updated, other languages often lag and miss being kept updated.

<br>

== Boot ==

Also see [[#Graphics|Graphics]].

<br>
== Live images ==

<br>
=== Non-working graphics ===

By default the Live images allow the X.org display server to automatically configure itself. If you have no graphical display at the end of the boot cycle, try removing ''noxconf'' from the boot options in the initial boot menu (press {{keypress|e}} to edit the boot options), which enables service_harddrake to perform the display configuration. This may also help to force the initial language and locale selection dialogue to be duplicated on each monitor when you have two or more monitors connected, instead of being spread across them.

Some '''NVIDIA''' graphics cards don't work properly (or at all) with the free video driver (nouveau). In this case, as well as removing ''noxconf'', try replacing ''xdriver=free'' with ''xdriver=modesetting'', or alternatively, try using the non-free (proprietary) drivers by selection directly in the boot menu.

If you don't get a graphical display on a laptop with '''hybrid graphics''', as well as removing ''noxconf'', try replacing ''xdriver=free'' with ''xdriver=intel''. This will force the system to use the Intel GPU which often is the one electrically connected to the monitor.

If [[Persistent_live_systems|persistence]] is enabled with the Live image, your settings will be preserved.

<br>
=== Non-working WiFi cards ===

=== Live Xfce ===
During updates of some system part, several file manager windows pops up. Explanation: Xfce by default mount available drives, and some update procedure remounts them. Workaround: just close those windows.


<br>
=== Live installer ===

{{bug|33135}} '''If using an updated Live''' system (using persistence or it is updated while running) and there is no internet connection during install but updates to grub2 or dependencies exists, installer will fail the last step of install as it fail retrieving the needed packages. '''WORKAROUND''' is to '''disable the online repositories - before starting the installer.''' Note that the internal default Live repositories need to be enabled. For more information see [[Install_to_removable_device#Using_the_Live_installer|notes on Live installer]].

==== Retaining a third party bootloader ====

If, during Live install, you want to retain your existing third party bootloader, then, when you get the bootloader screen, proceed to the NEXT screen titled 'Mageia Live' where there is an 'Advanced' button below the 'Probe Foreign OS' option.

In this advanced section there is a checkbox labeled "Do not touch ESP or MBR". Checking this box will stop your current bootloader from being modified. You will then need to add Mageia to a bootloader yourself.<!--[https://bugs.mageia.org/show_bug.cgi?id=19949#c21 bug 19949 comment 21]-->
See also [https://doc.mageia.org/draklive/9/en/content/setupBootloader.html the Live install manual].

<br>

== Installer images ==


<br>
=== Intel Rapid Storage Technology, RST incompatibility ===

If your device is using [https://en.wikipedia.org/wiki/Intel_Rapid_Storage_Technology RST (Intel Rapid Storage Technology)] (default for many new devices), you must read [[Install_on_device_using_RST|Install on device using RST]].
<!-- Maybe we should write something on Release notes also/instead? Also see https://bugs.mageia.org/show_bug.cgi?id=31601 for the error message. -->

<br>
=== Sound ===

<br>
=== Crashes in install process ===

<br>
==== Crash before the end of install ====

{{bug|31628}} At least one case has been reported where the installation process crashes on an old BIOS laptop before completion. It is possible that you will get a bootable Mageia 9 after restarting. Try a full update immediately.

<br>

==== Crash at end of install ====

{{bug|27838}} Some computers have buggy firmwares, causing writes to EFI NVRAM to fail at end of Mageia installation. '''Workaround:''' When configuring the bootloader at end of the install: Select rEFInd instead of GRUB, check "Install in /EFI/BOOT", uncheck the option to store to NVRAM.

<br>
=== NetInstaller ===

{{Bug|28225}} On some UEFI machines, the NetInstaller ISO boots with a '''Grub error message''': ''error: ../../grub-core/video/readers/png.c:595 invalid filter value'' And shows Grub2 menu using text mode instead of graphic. Functionality is not affected; it is just a cosmetic quirk.



==== USB memory formatted with Ventoy ====

[https://www.ventoy.net/en/index.html {{prog|Ventoy}}] is an open source tool to create bootable USB drive for ISO/WIM/IMG/VHD(x)/EFI files.
With Ventoy, you don't need to format the disk over and over, you just need to copy the ISO/WIM/IMG/VHD(x)/EFI files to the USB drive and boot them directly.

After booting a network image, if the source of the Mageia installation (could be a DVD Classic installer or local copy of Mageia's tree of files) is in the '''Ventoy''' labelled partition (i.e. where the ISO images must be stored) you may have to unplug and replug the USB device to get access to the partition. [https://bugs.mageia.org/show_bug.cgi?id=28371#c23 Comment#23 in mga#28371]

Other workaround is reserve some space at the moment of format the USB memory with Ventoy, format that partition with any of the filesystems supported by the installer and store the source of Mageia installation in that partition ([https://bugs.mageia.org/show_bug.cgi?id=28371#c33 Comment 33 in mga#28371]).

Note: Of course if you have one of the DVD Classic installation images you can instead directly select it from the Ventoy's boot menu.

<br>

=== To use the 32-bit Classic installer on USB as a repository ===

After system install, the Classic Installer ISOs can be utilized as a repository, to install software from without using internet - if you have left enabled the CDROM entries in the urpmi media.
<br>
The 64 bit ISO works for this both when placed on DVD and on a USB stick.<br>
The 32 bit ISO works for this directly for DVD, but not USB. To allow the USB install ISO
to function as a repository, do the following:<br>
As root, manually mount the ISO filesystem by <br>
<code> mount /dev/sdX /mnt </code> <br>
replacing sdX with the appropriate drive identifier, e.g sdb, and
noting that is the raw disk device, not a partition (e.g. not sdb1).<br>
urpmi will then be able to use the USB stick as an install source.

<br>

== Graphics ==

''For how to change driver and some other tips see [[Setup_the_graphical_server|here]].''

<br>
=== AMD/ATI ===


==== AMD OpenCL ====

<br>

=== Nvidia ===

<br>

=== Recording your desktop ===


<br>

== Desktops ==

=== Various ===
{{bug|34205}} On systems which got upgraded from Mageia 9, with LXDE desktop + {{prog|lxdm}} as desktop manager, some applications try to open a bus for root. When run from a terminal, messages like this appear:
Failed to connect to socket /root/.cache/at-spi/bus_0: Permission denied

'''Manual Fix''' In Desktop Session Settings {{prog|lxsession-edit}} -> {{prog|Automatically Started Applications}}, enable AT-SPDI-D-Bus, close and restart the session.


{{bug|34836}} After installation, the default login is set to IceWM-session. This is due to the alphabetical order of the desktop sessions. '''WORKAROUND:''' Simply select the desired desktop session on the login manager screen where you enter your username and password.

=== GNOME ===

<br>

=== Plasma ===


=== Under Wayland ===


==== As a VirtualBox Guest ====

==== GNOME and Wayland ====


==== Plasma and Wayland ====


==== LXQt and Wayland ====

{{bug|34495}} The Mageia Control Center and other GUI tools may not open after entering the password. '''WORKAROUND:''' Use kwin_wayland as window manager for the LXQt Wayland session, or try one of the scripts attached in the report, as root put one or both in (by example) {{folder|/usr/bin}} and give execution rights, take care of the warning in comment 18.


<br>

== Software ==

<br>

=== Chromium browser ===
Currently we do not have a permanent maintainer for Chromium and cannot provide updates in time. '''WORKAROUND''': Install Chromium via [[Flatpak|Flatpak]] or use the Chrome rpm from Google.

=== Firefox ESR ===


=== Flatpak ===

=== Backports problems ===


=== Phone USB connection ===


=== Virtualization software ===


==== VirtualBox ====


=== Games ===


=== Various software ===
{{Bug|34293}} Some KDE applications like {{prog|plasmatube}}, may fail when installed on non Plasma Desktop systems. '''WORKAROUND:''' See {{Bug|34812#c3}}

{{Bug|34634}} - '''CodeBlocks:''' For now, we had to disable the wxSmith plugin.

=== External software ===
<br>

== System ==


<br>
=== Mageia tools ===


=== Backport kernel ===

=== Dual boot with Windows(tm) ===
{{bug|33379}} For Windows 10 (and later?) the fast startup feature produce that Linux systems can't mount Windows's partitions. You can disable fast startup and make sure Windows make a good power off runing
powercfg /h


<br>

== Security ==

<br>
=== Boot of system with cyphered partitions ===

====Entering password in text mode boot====

The question asking for the password may get scrolled away. - Just start typing the password when the scrolling has stopped.

====Increasing security====

mga#19800 - CVE-2016-4484 Failed tries to enter the password of a cyphered partition with LUKS end with a shell.

People who want to secure their system have to:

add a BIOS password
add a grub password
add “rd.shell=0” to the kernel command line

== Miscellaneous ==

<br>
=== Hibernation ===


=== Networking ===


==== Downloading software ====

==== Mounting NFSv3 shares ====

==== Network sharing ====


==== Samba ====


==== Firewall ====


=== Printing ===



=== Shell / Terminals ===



== Upgrade issues ==

''Be sure to follow one of [[Mageia_9_Release_Notes#Upgrading_from_Mageia_8|the procedures in Release Notes]]. Avoid screen saver interfering! {{Bug|25251}}''

<br>
=== If upgrade failed ===

==== Possible reasons ====

* Interrupted internet, interrupted power...
* For online updates, if your system use dkms and you have forgotten to update and reboot to latest kernel, [[Mageia_9_Release_Notes#Online-Upgrade|per instructions]], dkms fail. <!--- mga8, #31982 -->
* {{bug|34909}} The installations assume the time zone is UTC and the packages are too new, giving issues with signatures that not verify, this will be fixed in next ISOs, but for workarounds see next section.
* Various other...

==== Remedies ====

Do a full update. I.e in a terminal use the command {{cmd|urpmi --auto-update}}. When everything is updated, reboot.

If problems downloading packages, see [[#Downloading_Software|Downloading Software]].

If your system fail to boot to desktop: In the boot menu select "Advanced options for Mageia", then the item with highest kernel version containing "(recovery mode)", give root password, issue {{cmd|telinit 3}} (enables network), then log in as root and issue the urpmi command.

If you can not boot to a usable state, perform an [[Mageia_9_Release_Notes#Using_the_installer_to_Upgrade|upgrade using a traditional DVD or netinstall installer]]. It will try to resolve dependencies and missing packages. Remember to '''not format''' any partition. Alternatively use DNF to synchronize packages and fix dependencies [[#Synchronizing_from_development_to_release|per below]].

The bad signatures issue ({{bug|34909}}) is produced if you add [https://doc.mageia.org/installer/9/en/content/software.html additional online media], when fail after [https://doc.mageia.org/installer/9/en/content/software.html#chooseDesktop Desktop selection] or [https://doc.mageia.org/installer/9/en/content/software.html#choosePackageGroups Group selection] you will be returned to [https://doc.mageia.org/installer/9/en/content/software.html add additional media step], configure again all additional media and before to proceed to the next step, change to terminal pressing {{keypress|Ctrl}}+{{keypress|Alt}}+{{keypress|F2}}, run {{prog|date}} to get the date & time information (or have at hand other source where you can consult the information), you need to know the [https://en.wikipedia.org/wiki/List_of_time_zone_abbreviations abbreviation] of your time zone, then run

<pre>date --set="<day> <month abbreviation in english> <year> <hour in 24 hours format> <time zone abbreviation>"</pre>
Then switch back to installer screen pressing {{keypress|Ctrl}}+{{keypress|Alt}}+{{keypress|F7}}, this should allow to continue without this issue.

You can just boot from one of the netinstall ISOs and select HTTP as source for the stage 2, this will bring you a new step to set your time zone.

Ask for help in our forum :)

If all upgrade attempts fail, the fallback is to do a fresh install, possibly keeping (not formatting) {{folder|/home}}.

<br>

=== No upgrade offered by the applet ===

The applet in system tray that notifies when normal updates exist for your system, will also notify when you can upgrade to a new Mageia release.

We delay enabling this message for some time after release date in order to solve issues found by early installers and upgraders. So '''just wait''', or [[Mageia_9_Release_Notes#Upgrading_from_Mageia_8|upgrade per methods described in the Release Notes]]. Upgrading was enabled in September 2023.

<br>

=== Slow reboot/shutdown after the upgrade ===

When you upgrade to Mageia 10 with the Classic Installer ISOs, you can find after boot in the system,
a delay in the reboot/shutdown process.
This is caused by {{prog|dhcpcd}} to fix just run this as root {{cmd|systemctl enable --now dhcpcd}} and reboot, you will get one last slow reboot.

Upgrades with {{prog|urpmi}}, {{prog|dnf}} or the mageia's applet should not be affected.


=== Removed packages ===

Generally, see [[Mageia_10_Release_Notes#Packages_removed_from_the_distribution|at end of Release Notes]]. See also {{bug|32127}}

'''VirtualBox 32 bit''' host is no longer [[Mageia_8_Release_Notes#VirtualBox|since Mageia 8]].

<br>

=== Unused packages ===

=== Synchronizing from development to release ===

=== Various upgrade issues === Katnatek

Spanish Link

← Older revision Revision as of 17:09, 1 February 2026 Line 2: Line 2:  [[Category:Mageia 10]] [[Category:Mageia 10]]    −{{multi language banner|[[Mageia 10 Errata-de|Deutsch]] ; [[Mageia 10 Errata|English]]}}+{{multi language banner|[[Mageia 10 Errata-de|Deutsch]] ; [[Mageia 10 Errata|English]] ; [[Erratas de Mageia 10-es|Español]]}}  +      == Notes == == Notes == Katnatek