Imagenes de instalación de las versiones estables para Mageia y OpenMandriva.
OpenMandriva: Mageia (Mageia 9) 20/Agosto/2023 - Anuncio, Descargas.
Blogdrake recomienda descargar las imágenes de instalación (iso) vía torrent para evitar corrupción de datos, aprovechar mejor su ancho de banda y mejorar la difusión de las distribuciones.
¿Plymouth? o pantalla de inicio no funciona.
Buenas.
No sé bien en qué momento o como, pero en vez de aparecerme la imagen de Mageia cuando carga el sistema se ve una barra blanca y azul muy cutre debajo.
He investigado un poco e intenté instalar un tema de Plymouth así:
http://blog.desdelinux.net/genial-plymouth-para-mageia/
Con el último comando que indica, el que instala, tengo este log:
[root@localhost zorion]# sudo plymouth-set-default-theme -R SteampunK
Creating: target|kernel|dracut args|basicmodules
Executing: /bin/dracut -f /boot/initrd-3.19.8-desktop-3.mga5.img 3.19.8-desktop-3.mga5
dracut module 'bootchart' will not be installed, because command '/sbin/bootchartd' could not be found!
dracut module 'caps' will not be installed, because command 'capsh' could not be found!
dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut module 'network' will not be installed, because it's in the list to be omitted!
dracut module 'network' will not be installed, because it's in the list to be omitted!
dracut module 'ifcfg' depends on 'network', which can't be installed
dracut module 'dmraid' will not be installed, because command 'dmraid' could not be found!
dracut module 'lvm' will not be installed, because command 'lvm' could not be found!
dracut module 'mdraid' will not be installed, because command 'mdadm' could not be found!
dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
dracut module 'iscsi' will not be installed, because command 'iscsistart' could not be found!
dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut module 'nbd' will not be installed, because command 'nbd-client' could not be found!
95nfs: Could not find any command of 'rpcbind portmap'!
dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
dracut module 'systemd' will not be installed, because it's in the list to be omitted!
dracut module 'caps' will not be installed, because command 'capsh' could not be found!
dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut module 'ifcfg' depends on 'network', which can't be installed
dracut module 'dmraid' will not be installed, because command 'dmraid' could not be found!
dracut module 'lvm' will not be installed, because command 'lvm' could not be found!
dracut module 'mdraid' will not be installed, because command 'mdadm' could not be found!
dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
dracut module 'iscsi' will not be installed, because command 'iscsistart' could not be found!
dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut module 'nbd' will not be installed, because command 'nbd-client' could not be found!
95nfs: Could not find any command of 'rpcbind portmap'!
*** Including module: bash ***
*** Including module: dash ***
*** Including module: i18n ***
*** Including module: drm ***
*** Including module: plymouth ***
*** Including module: kernel-modules ***
*** Including module: resume ***
*** Including module: rootfs-block ***
*** Including module: terminfo ***
*** Including module: udev-rules ***
Skipping udev rule: 91-permissions.rules
Skipping udev rule: 80-drivers-modprobe.rules
*** Including module: usrmount ***
*** Including module: base ***
*** Including module: fs-lib ***
*** Including module: shutdown ***
*** Including modules done ***
*** Installing kernel module dependencies and firmware ***
*** Installing kernel module dependencies and firmware done ***
*** Resolving executable dependencies ***
*** Resolving executable dependencies done***
*** Stripping files ***
*** Stripping files done ***
*** Store current command line parameters ***
*** Creating image file ***
*** Creating image file done ***
Por si sirve, tengo esto en el cargador de arranque:
root=UUID=9f6db118-adae-4e25-84c5-c687130f9c71 ro nokmsboot splash quiet noiswmd resume=UUID=b732846a-2a8c-4086-873c-f167670867c2
Pero no sé donde está el problema. ¿Qué podría intentar?
Gracias, un saludo. :)
# 123892 Si ya eres root, ¿para qué usas sudo?
Si ya eres root, ¿para qué usas sudo?, para probar descargue el tema y como root ejecute.
plymouth-set-default-theme -R SteampunK
Reinicie y todo como se esperaba.
¿lo usas?, ¿la lees?, ¿las conoces?,Herramienta útil
Usuario
# 123894 Pues básicamente porque creía
Pues básicamente porque creía que era algo distinto. XD
Pero igual como tú lo pones, me falla. Me sale un log muy similar, pero cuando inicio sigue igual. Salen unas letras, la barra esta, y luego inicia el sistema. ._.
A veces creo que estoy gafada. O soy una manazas y rompo cosas sin darme cuenta, aunque no sé cómo.
Gracias por la ayuda. =3 / =P Vive y deja vivir.
# 123895 veamos si algo falta
Esto me sale se ejecuto
¿lo usas?, ¿la lees?, ¿las conoces?,Herramienta útil
Usuario
# 123899 Pues lo tengo todo.
[zorion@localhost ~]$ rpm -qa|grep plymouthplymouth-theme-charge-0.8.6.1-13.mga5
plymouth-theme-spinner-0.8.6.1-13.mga5
plymouth-theme-spinfinity-0.8.6.1-13.mga5
plymouth-scripts-0.8.6.1-13.mga5
plymouth-plugin-two-step-0.8.6.1-13.mga5
plymouth-theme-script-0.8.6.1-13.mga5
plymouth-plugin-label-0.8.6.1-13.mga5
plymouth-plugin-fade-throbber-0.8.6.1-13.mga5
plymouth-system-theme-0.8.6.1-13.mga5
plymouth-plugin-space-flares-0.8.6.1-13.mga5
plymouth-0.8.6.1-13.mga5
plymouth-theme-glow-0.8.6.1-13.mga5
plymouth-theme-fade-in-0.8.6.1-13.mga5
plymouth-utils-0.8.6.1-13.mga5
plymouth-plugin-script-0.8.6.1-13.mga5
plymouth-plugin-throbgress-0.8.6.1-13.mga5
libplymouth2-0.8.6.1-13.mga5
plymouth-theme-solar-0.8.6.1-13.mga5
libplymouth-devel-0.8.6.1-13.mga5
Una de las pruebas que hice fue instalar todo a ver si faltaba algo. Los temas era por cambiarlo. Pero nada...
Lo que indicas lo tengo instalado. ._.
Gracias por la ayuda. =3 / =P Vive y deja vivir.
# 123904 Como root ejecuta estos comandos
Fuente:https://forums.mageia.org/en/viewtopic.php?f=8&t=707
¿lo usas?, ¿la lees?, ¿las conoces?,Herramienta útil
Usuario
# 123905 Alguien debería pagarte kat,
Alguien debería pagarte kat, hablaré con el tío Bill
Tilt at windmills, come on!!
http://www.youtube.com/watch?v=MAow3ufdK2Y
Usuario
# 123907 No me ha servido. Por si
No me ha servido.
Por si sirve, esto es lo que salió:
[zorion@localhost ~]$ suContraseña:
[root@localhost zorion]# /usr/libexec/plymouth/plymouth-generate-initrd
17394 blocks
[root@localhost zorion]# /usr/libexec/plymouth/plymouth-update-initrd
Creating: target|kernel|dracut args|basicmodules
Executing: /usr/bin/dracut -f /boot/initrd-3.19.8-desktop-3.mga5.img 3.19.8-desktop-3.mga5
dracut module 'bootchart' will not be installed, because command '/sbin/bootchartd' could not be found!
dracut module 'caps' will not be installed, because command 'capsh' could not be found!
dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut module 'network' will not be installed, because it's in the list to be omitted!
dracut module 'network' will not be installed, because it's in the list to be omitted!
dracut module 'ifcfg' depends on 'network', which can't be installed
dracut module 'dmraid' will not be installed, because command 'dmraid' could not be found!
dracut module 'lvm' will not be installed, because command 'lvm' could not be found!
dracut module 'mdraid' will not be installed, because command 'mdadm' could not be found!
dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
dracut module 'iscsi' will not be installed, because command 'iscsistart' could not be found!
dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut module 'nbd' will not be installed, because command 'nbd-client' could not be found!
95nfs: Could not find any command of 'rpcbind portmap'!
dracut module 'biosdevname' will not be installed, because command 'biosdevname' could not be found!
dracut module 'systemd' will not be installed, because it's in the list to be omitted!
dracut module 'caps' will not be installed, because command 'capsh' could not be found!
dracut module 'busybox' will not be installed, because command 'busybox' could not be found!
dracut module 'ifcfg' depends on 'network', which can't be installed
dracut module 'dmraid' will not be installed, because command 'dmraid' could not be found!
dracut module 'lvm' will not be installed, because command 'lvm' could not be found!
dracut module 'mdraid' will not be installed, because command 'mdadm' could not be found!
dracut module 'multipath' will not be installed, because command 'multipath' could not be found!
dracut module 'fcoe' will not be installed, because command 'dcbtool' could not be found!
dracut module 'fcoe' will not be installed, because command 'fipvlan' could not be found!
dracut module 'fcoe' will not be installed, because command 'lldpad' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'dcbtool' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'fipvlan' could not be found!
dracut module 'fcoe-uefi' will not be installed, because command 'lldpad' could not be found!
dracut module 'iscsi' will not be installed, because command 'iscsistart' could not be found!
dracut module 'iscsi' will not be installed, because command 'iscsi-iname' could not be found!
dracut module 'nbd' will not be installed, because command 'nbd-client' could not be found!
95nfs: Could not find any command of 'rpcbind portmap'!
*** Including module: bash ***
*** Including module: dash ***
*** Including module: i18n ***
*** Including module: drm ***
*** Including module: plymouth ***
*** Including module: kernel-modules ***
*** Including module: resume ***
*** Including module: rootfs-block ***
*** Including module: terminfo ***
*** Including module: udev-rules ***
Skipping udev rule: 91-permissions.rules
Skipping udev rule: 80-drivers-modprobe.rules
*** Including module: usrmount ***
*** Including module: base ***
*** Including module: fs-lib ***
*** Including module: shutdown ***
*** Including modules done ***
*** Installing kernel module dependencies and firmware ***
*** Installing kernel module dependencies and firmware done ***
*** Resolving executable dependencies ***
*** Resolving executable dependencies done***
*** Stripping files ***
*** Stripping files done ***
*** Store current command line parameters ***
*** Creating image file ***
*** Creating image file done ***
[root@localhost zorion]#
Gracias por la ayuda. =3 / =P Vive y deja vivir.
# 123908 Pues lo único que se me
Pues lo único que se me ocurre es que no pusieras el tema en la carpeta adecuada
Resultado
¿lo usas?, ¿la lees?, ¿las conoces?,Herramienta útil
Usuario
# 123915 Está en el sitio correcto.
Está en el sitio correcto. u.u
Gracias por la ayuda. =3 / =P Vive y deja vivir.
Usuario
# 123916 En referencia a este tema en
En referencia a este tema en Mageia encontré esto:
https://bugs.mageia.org/show_bug.cgi?id=11694
Sospecho que los drivers de Nvidia son mi problema, aunque la línea de arranque de Mageia ya tiene ese comando incluido...
En Ubuntu encontré esto:
http://askubuntu.com/questions/362722/how-to-fix-splash-screen-in-all-ubuntu-releases
Pero no sé si esa solución, que no entiendo, se puede aplicar de algún modo a este sistema...
Gracias por la ayuda. =3 / =P Vive y deja vivir.
Usuario
# 123917 Solución.
Centro de Control - Arranque - (siguiente) - Avanzada - Modo de Vídeo
Aún tengo que hacer alguna prueba más, pero si el modo de Vídeo lo establezco en 800x600 me vuelve a funcionar. Lo que no sé es qué diferencia hay entre los distintos modos de bpp.
Le he dejado el theme predefinido de Mageia, el de Steampunk no me funciona bien... Los primeros segundos sí, pero luego la imagen se "rompe", viéndose trozos. Ya lo investigaré en otro momento, de momento la imagen predefinida va perfecta.
Gracias por la ayuda. =3 / =P Vive y deja vivir.